target/linux/lantiq/dts/FRITZ7360SL.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "FRITZ7360SL - 1&1 HomeServer";
   9
  10         chosen {
  11                 bootargs = "init=/etc/preinit";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18
  19                 led-internet = &info_green;
  20                 led-dsl = &power_green;
  21                 led-wifi = &wifi;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x8000000>;
  26         };
  27
  28         fpi@10000000 {
  29                 localbus@0 {
  30                         nor-boot@0 {
  31                                 compatible = "lantiq,nor";
  32                                 bank-width = <2>;
  33                                 reg = <0 0x0 0x1000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36                                 partitions {
  37                                         compatible = "fixed-partitions";
  38                                         #address-cells = <1>;
  39                                         #size-cells = <1>;
  40                                         urlader: partition@0 {
  41                                                 label = "urlader";
  42                                                 reg = <0x00000 0x20000>;
  43                                                 read-only;
  44                                         };
  45
  46                                         partition@20000 {
  47                                                 label = "firmware";
  48                                                 reg = <0x20000 0xf60000>;
  49                                         };
  50
  51                                         partition@f80000 {
  52                                                 label = "tffs (1)";
  53                                                 reg = <0xf80000 0x40000>;
  54                                                 read-only;
  55                                         };
  56
  57                                         partition@fc0000 {
  58                                                 label = "tffs (2)";
  59                                                 reg = <0xfc0000 0x40000>;
  60                                                 read-only;
  61                                         };
  62                                 };
  63                         };
  64                 };
  65
  66                 gpio: pinmux@E100B10 {
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&state_default>;
  69
  70                         state_default: pinmux {
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 phy-rst {
  76                                         lantiq,pins = "io37", "io44";
  77                                         lantiq,pull = <2>;
  78                                         lantiq,open-drain;
  79                                         lantiq,output = <1>;
  80                                 };
  81                                 pcie-rst {
  82                                         lantiq,pins = "io38";
  83                                         lantiq,pull = <0>;
  84                                         lantiq,output = <1>;
  85                                 };
  86                         };
  87                 };
  88
  89                 ifxhcd@E101000 {
  90                         status = "okay";
  91                         lantiq,portmask = <0x3>;
  92                 };
  93
  94                 ifxhcd@E106000 {
  95                         status = "okay";
  96                 };
  97         };
  98
  99         gphy-xrx200 {
 100                 compatible = "lantiq,phy-xrx200";
 101                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 102                 phys = [ 00 01 ];
 103         };
 104
 105         gpio-keys-polled {
 106                 compatible = "gpio-keys-polled";
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109                 poll-interval = <100>;
 110                 dect {
 111                         label = "dect";
 112                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 113                         linux,code = <KEY_PHONE>;
 114                 };
 115                 wifi {
 116                         label = "wifi";
 117                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 118                         linux,code = <KEY_WLAN>;
 119                 };
 120         };
 121
 122         gpio-leds {
 123                 compatible = "gpio-leds";
 124
 125                 power_green: power {
 126                         label = "fritz7360sl:green:power";
 127                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 128                         default-state = "keep";
 129                 };
 130                 power_red: power2 {
 131                         label = "fritz7360sl:red:power";
 132                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 133                 };
 134                 info_red {
 135                         label = "fritz7360sl:red:info";
 136                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
 137                 };
 138                 info_green: info_green {
 139                         label = "fritz7360sl:green:info";
 140                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 141                 };
 142                 wifi: wifi {
 143                         label = "fritz7360sl:green:wlan";
 144                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
 145                 };
 146                 dect {
 147                         label = "fritz7360sl:green:dect";
 148                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 149                 };
 150         };
 151 };
 152
 153 &eth0 {
 154         lan: interface@0 {
 155                 compatible = "lantiq,xrx200-pdi";
 156                 #address-cells = <1>;
 157                 #size-cells = <0>;
 158                 reg = <0>;
 159                 mac-address = [ 00 11 22 33 44 55 ];
 160                 lantiq,switch;
 161
 162                 ethernet@0 {
 163                         compatible = "lantiq,xrx200-pdi-port";
 164                         reg = <0>;
 165                         phy-mode = "rmii";
 166                         phy-handle = <&phy0>;
 167                         // gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
 168                 };
 169                 ethernet@1 {
 170                         compatible = "lantiq,xrx200-pdi-port";
 171                         reg = <1>;
 172                         phy-mode = "rmii";
 173                         phy-handle = <&phy1>;
 174                         // gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 175                 };
 176                 ethernet@2 {
 177                         compatible = "lantiq,xrx200-pdi-port";
 178                         reg = <2>;
 179                         phy-mode = "gmii";
 180                         phy-handle = <&phy11>;
 181                 };
 182                 ethernet@3 {
 183                         compatible = "lantiq,xrx200-pdi-port";
 184                         reg = <4>;
 185                         phy-mode = "gmii";
 186                         phy-handle = <&phy13>;
 187                 };
 188         };
 189
 190         mdio@0 {
 191                 #address-cells = <1>;
 192                 #size-cells = <0>;
 193                 compatible = "lantiq,xrx200-mdio";
 194                 phy0: ethernet-phy@0 {
 195                         reg = <0x00>;
 196                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 197                 };
 198                 phy1: ethernet-phy@1 {
 199                         reg = <0x01>;
 200                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 201                 };
 202                 phy11: ethernet-phy@11 {
 203                         reg = <0x11>;
 204                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 205                 };
 206                 phy13: ethernet-phy@13 {
 207                         reg = <0x13>;
 208                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 209                 };
 210         };
 211 };
 212
 213 &pcie0 {
 214         pcie@0 {
 215                 reg = <0 0 0 0 0>;
 216                 #interrupt-cells = <1>;
 217                 #size-cells = <2>;
 218                 #address-cells = <3>;
 219                 device_type = "pci";
 220
 221                 wifi@168c,002e {
 222                         compatible = "pci168c,002e";
 223                         reg = <0 0 0 0 0>;
 224                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 225                 };
 226         };
 227 };