target/linux/lantiq/dts/FRITZ7360SL.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ7360SL - 1&1 HomeServer";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_green;
  15
  16                         internet = &info_green;
  17                         dsl = &power_green;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x8000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nor-boot@0 {
  29                                 compatible = "lantiq,nor";
  30                                 bank-width = <2>;
  31                                 reg = <0 0x0 0x1000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34                                 partitions {
  35                                         compatible = "fixed-partitions";
  36                                         #address-cells = <1>;
  37                                         #size-cells = <1>;
  38                                         urlader: partition@0 {
  39                                                 label = "urlader";
  40                                                 reg = <0x00000 0x20000>;
  41                                                 read-only;
  42                                         };
  43
  44                                         partition@20000 {
  45                                                 label = "firmware";
  46                                                 reg = <0x20000 0xf60000>;
  47                                         };
  48
  49                                         partition@f80000 {
  50                                                 label = "tffs (1)";
  51                                                 reg = <0xf80000 0x40000>;
  52                                                 read-only;
  53                                         };
  54
  55                                         partition@fc0000 {
  56                                                 label = "tffs (2)";
  57                                                 reg = <0xfc0000 0x40000>;
  58                                                 read-only;
  59                                         };
  60                                 };
  61                         };
  62                 };
  63
  64                 gpio: pinmux@E100B10 {
  65                         pinctrl-names = "default";
  66                         pinctrl-0 = <&state_default>;
  67
  68                         state_default: pinmux {
  69                                 mdio {
  70                                         lantiq,groups = "mdio";
  71                                         lantiq,function = "mdio";
  72                                 };
  73                                 phy-rst {
  74                                         lantiq,pins = "io37", "io44";
  75                                         lantiq,pull = <2>;
  76                                         lantiq,open-drain;
  77                                         lantiq,output = <1>;
  78                                 };
  79                                 pcie-rst {
  80                                         lantiq,pins = "io38";
  81                                         lantiq,pull = <0>;
  82                                         lantiq,output = <1>;
  83                                 };
  84                         };
  85                 };
  86
  87                 ifxhcd@E101000 {
  88                         status = "okay";
  89                         lantiq,portmask = <0x3>;
  90                 };
  91
  92                 ifxhcd@E106000 {
  93                         status = "okay";
  94                 };
  95         };
  96
  97         ath9k_eep {
  98                 compatible = "ath9k,eeprom";
  99                 ath,eep-flash = <&urlader 0x985>;
 100                 ath,eep-endian;
 101                 ath,eep-swap;
 102                 ath,pci-slot = <0>;
 103         };
 104
 105         gphy-xrx200 {
 106                 compatible = "lantiq,phy-xrx200";
 107                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 108                 phys = [ 00 01 ];
 109         };
 110
 111         gpio-keys-polled {
 112                 compatible = "gpio-keys-polled";
 113                 #address-cells = <1>;
 114                 #size-cells = <0>;
 115                 poll-interval = <100>;
 116                 dect {
 117                         label = "power";
 118                         gpios = <&gpio 1 0>;
 119                         linux,code = <0x102>;
 120                 };
 121                 wifi {
 122                         label = "wifi";
 123                         gpios = <&gpio 29 0>;
 124                         linux,code = <0x101>;
 125                 };
 126         };
 127
 128         gpio-leds {
 129                 compatible = "gpio-leds";
 130
 131                 power_green: power {
 132                         label = "fritz7360sl:green:power";
 133                         gpios = <&gpio 32 1>;
 134                         default-state = "keep";
 135                 };
 136                 power_red: power2 {
 137                         label = "fritz7360sl:red:power";
 138                         gpios = <&gpio 33 1>;
 139                 };
 140                 info_red {
 141                         label = "fritz7360sl:red:info";
 142                         gpios = <&gpio 34 1>;
 143                 };
 144                 info_green: info_green {
 145                         label = "fritz7360sl:green:info";
 146                         gpios = <&gpio 47 1>;
 147                 };
 148                 wifi: wifi {
 149                         label = "fritz7360sl:green:wlan";
 150                         gpios = <&gpio 36 1>;
 151                 };
 152                 dect {
 153                         label = "fritz7360sl:green:dect";
 154                         gpios = <&gpio 35 1>;
 155                 };
 156         };
 157 };
 158
 159 &eth0 {
 160         lan: interface@0 {
 161                 compatible = "lantiq,xrx200-pdi";
 162                 #address-cells = <1>;
 163                 #size-cells = <0>;
 164                 reg = <0>;
 165                 mac-address = [ 00 11 22 33 44 55 ];
 166                 lantiq,switch;
 167
 168                 ethernet@0 {
 169                         compatible = "lantiq,xrx200-pdi-port";
 170                         reg = <0>;
 171                         phy-mode = "rmii";
 172                         phy-handle = <&phy0>;
 173                         // gpios = <&gpio 37 1>;
 174                 };
 175                 ethernet@1 {
 176                         compatible = "lantiq,xrx200-pdi-port";
 177                         reg = <1>;
 178                         phy-mode = "rmii";
 179                         phy-handle = <&phy1>;
 180                         // gpios = <&gpio 44 1>;
 181                 };
 182                 ethernet@2 {
 183                         compatible = "lantiq,xrx200-pdi-port";
 184                         reg = <2>;
 185                         phy-mode = "gmii";
 186                         phy-handle = <&phy11>;
 187                 };
 188                 ethernet@3 {
 189                         compatible = "lantiq,xrx200-pdi-port";
 190                         reg = <4>;
 191                         phy-mode = "gmii";
 192                         phy-handle = <&phy13>;
 193                 };
 194         };
 195
 196         mdio@0 {
 197                 #address-cells = <1>;
 198                 #size-cells = <0>;
 199                 compatible = "lantiq,xrx200-mdio";
 200                 phy0: ethernet-phy@0 {
 201                         reg = <0x00>;
 202                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 203                 };
 204                 phy1: ethernet-phy@1 {
 205                         reg = <0x01>;
 206                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 207                 };
 208                 phy11: ethernet-phy@11 {
 209                         reg = <0x11>;
 210                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 211                 };
 212                 phy13: ethernet-phy@13 {
 213                         reg = <0x13>;
 214                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 215                 };
 216         };
 217 };