target/linux/lantiq/dts/GIGASX76X.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
   9         model = "GIGASX76X - Gigaset SX761,SX762,SX763";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         memory@0 {
  16                 reg = <0x0 0x2000000>;
  17         };
  18
  19         sram@1F000000 {
  20                 vmmc@107000 {
  21                         status = "okay";
  22                         gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
  23                 };
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nor-boot@0 {
  29                                 compatible = "lantiq,nor";
  30                                 bank-width = <2>;
  31                                 reg = <0 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39
  40                                         partition@0 {
  41                                                 label = "uboot";
  42                                                 reg = <0x0 0x30000>;
  43                                         };
  44
  45                                         partition@10000 {
  46                                                 label = "uboot_env";
  47                                                 reg = <0x30000 0x10000>;
  48                                         };
  49
  50                                         partition@40000 {
  51                                                 label = "firmware";
  52                                                 reg = <0x40000 0x7c0000>;
  53                                         };
  54                                 };
  55                         };
  56
  57                         gpiomm: gpiomm@4000000 {
  58                                 compatible = "lantiq,gpio-mm";
  59                                 reg = <1 0x0 0x10 >;
  60                                 #address-cells = <1>;
  61                                 #size-cells = <1>;
  62                                 #gpio-cells = <2>;
  63                                 gpio-controller;
  64                                 lantiq,shadow = <0x3>;
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&state_default>;
  71
  72                         state_default: pinmux {
  73                                 stp {
  74                                         lantiq,groups = "stp";
  75                                         lantiq,function = "stp";
  76                                 };
  77                         };
  78                 };
  79
  80                 gpios: stp@E100BB0 {
  81                         status = "okay";
  82                 };
  83
  84                 etop@E180000 {
  85                         phy-mode = "rmii";
  86                 };
  87
  88                 ifxhcd@E101000 {
  89                         status = "okay";
  90                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
  91                 };
  92
  93                 pci@E105400 {
  94                         status = "okay";
  95                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
  96                 };
  97         };
  98
  99         gpio-keys-polled {
 100                 compatible = "gpio-keys-polled";
 101                 #address-cells = <1>;
 102                 #size-cells = <0>;
 103                 poll-interval = <100>;
 104
 105                 reset {
 106                         label = "reset";
 107                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
 108                         linux,code = <KEY_RESTART>;
 109                 };
 110         };
 111
 112         gpio_export {
 113                 compatible = "gpio-export";
 114                 #size-cells = <0>;
 115
 116                 switch {
 117                         gpio-export,name = "switch";
 118                         gpio-export,output = <1>;
 119                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 120                 };
 121         };
 122 };