target/linux/lantiq/dts/TDW89X0.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "init=/etc/preinit";
   8         };
   9
  10         aliases {
  11                 /* the power led can't be controlled, use the wps led instead */
  12                 led-boot = &wps;
  13                 led-failsafe = &wps;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &internet;
  17                 led-wifi = &wifi;
  18                 led-usb = &usb0;
  19                 led-usb2 = &usb2;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 gpio: pinmux@E100B10 {
  28                         pinctrl-names = "default";
  29                         pinctrl-0 = <&state_default>;
  30
  31                         state_default: pinmux {
  32                                 mdio {
  33                                         lantiq,groups = "mdio";
  34                                         lantiq,function = "mdio";
  35                                 };
  36                                 gphy-leds {
  37                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  38                                         lantiq,function = "gphy";
  39                                         lantiq,pull = <2>;
  40                                         lantiq,open-drain = <0>;
  41                                         lantiq,output = <1>;
  42                                 };
  43                                 phy-rst {
  44                                         lantiq,pins = "io42";
  45                                         lantiq,pull = <0>;
  46                                         lantiq,open-drain = <0>;
  47                                         lantiq,output = <1>;
  48                                 };
  49                                 pcie-rst {
  50                                         lantiq,pins = "io38";
  51                                         lantiq,pull = <0>;
  52                                         lantiq,output = <1>;
  53                                 };
  54                         };
  55                         pins_spi_default: pins_spi_default {
  56                                 spi_in {
  57                                         lantiq,groups = "spi_di";
  58                                         lantiq,function = "spi";
  59                                 };
  60                                 spi_out {
  61                                         lantiq,groups = "spi_do", "spi_clk",
  62                                                 "spi_cs4";
  63                                         lantiq,function = "spi";
  64                                         lantiq,output = <1>;
  65                                 };
  66                         };
  67                 };
  68
  69                 ifxhcd@E101000 {
  70                         status = "okay";
  71                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  72                         lantiq,portmask = <0x3>;
  73                 };
  74
  75                 ifxhcd@E106000 {
  76                         status = "okay";
  77                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  78                 };
  79         };
  80
  81         gphy-xrx200 {
  82                 compatible = "lantiq,phy-xrx200";
  83                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  84                 phys = [ 00 01 ];
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <100>;
  92                 reset {
  93                         label = "reset";
  94                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  95                         linux,code = <KEY_RESTART>;
  96                 };
  97
  98                 wifi {
  99                         label = "wifi";
 100                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
 101                         linux,code = <KEY_RFKILL>;
 102                         linux,input-type = <EV_SW>;
 103                 };
 104
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_WPS_BUTTON>;
 109                 };
 110         };
 111
 112         gpio-leds {
 113                 compatible = "gpio-leds";
 114                 /*
 115                         power is not controllable via gpio
 116                 */
 117                 dsl: dsl {
 118                         label = "tdw89x0:green:dsl";
 119                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
 120                 };
 121                 internet: internet {
 122                         label = "tdw89x0:green:internet";
 123                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 124                 };
 125                 usb0: usb0 {
 126                         label = "tdw89x0:green:usb";
 127                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 128                 };
 129                 usb2: usb2 {
 130                         label = "tdw89x0:green:usb2";
 131                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
 132                 };
 133                 wps: wps {
 134                         label = "tdw89x0:green:wps";
 135                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 136                 };
 137         };
 138
 139         wifi-leds {
 140                 compatible = "gpio-leds";
 141
 142                 wifi: wifi {
 143                         label = "tdw89x0:green:wifi";
 144                         gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
 145                 };
 146         };
 147 };
 148
 149 &spi {
 150         pinctrl-names = "default";
 151         pinctrl-0 = <&pins_spi_default>;
 152
 153         status = "ok";
 154
 155         m25p80@4 {
 156                 #address-cells = <1>;
 157                 #size-cells = <1>;
 158                 compatible = "jedec,spi-nor";
 159                 reg = <4 0>;
 160                 spi-max-frequency = <33250000>;
 161                 m25p,fast-read;
 162
 163                 partitions {
 164                         compatible = "fixed-partitions";
 165                         #address-cells = <1>;
 166                         #size-cells = <1>;
 167
 168                         partition@0 {
 169                                 reg = <0x0 0x20000>;
 170                                 label = "u-boot";
 171                                 read-only;
 172                         };
 173
 174                         partition@20000 {
 175                                 reg = <0x20000 0x7a0000>;
 176                                 label = "firmware";
 177                         };
 178
 179                         partition@7c0000 {
 180                                 reg = <0x7c0000 0x10000>;
 181                                 label = "config";
 182                                 read-only;
 183                         };
 184
 185                         ath9k_cal: partition@7d0000 {
 186                                 reg = <0x7d0000 0x30000>;
 187                                 label = "boardconfig";
 188                                 read-only;
 189                         };
 190                 };
 191         };
 192 };
 193
 194 &eth0 {
 195         lan: interface@0 {
 196                 compatible = "lantiq,xrx200-pdi";
 197                 #address-cells = <1>;
 198                 #size-cells = <0>;
 199                 reg = <0>;
 200                 mtd-mac-address = <&ath9k_cal 0xf100>;
 201                 lantiq,switch;
 202
 203                 ethernet@0 {
 204                         compatible = "lantiq,xrx200-pdi-port";
 205                         reg = <0>;
 206                         phy-mode = "rgmii";
 207                         phy-handle = <&phy0>;
 208                         // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 209                 };
 210                 ethernet@5 {
 211                         compatible = "lantiq,xrx200-pdi-port";
 212                         reg = <5>;
 213                         phy-mode = "rgmii";
 214                         phy-handle = <&phy5>;
 215                 };
 216                 ethernet@2 {
 217                         compatible = "lantiq,xrx200-pdi-port";
 218                         reg = <2>;
 219                         phy-mode = "gmii";
 220                         phy-handle = <&phy11>;
 221                 };
 222                 ethernet@3 {
 223                         compatible = "lantiq,xrx200-pdi-port";
 224                         reg = <4>;
 225                         phy-mode = "gmii";
 226                         phy-handle = <&phy13>;
 227                 };
 228         };
 229
 230         mdio@0 {
 231                 #address-cells = <1>;
 232                 #size-cells = <0>;
 233                 compatible = "lantiq,xrx200-mdio";
 234                 phy0: ethernet-phy@0 {
 235                         reg = <0x0>;
 236                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 237                 };
 238                 phy5: ethernet-phy@5 {
 239                         reg = <0x5>;
 240                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 241                 };
 242                 phy11: ethernet-phy@11 {
 243                         reg = <0x11>;
 244                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 245                 };
 246                 phy13: ethernet-phy@13 {
 247                         reg = <0x13>;
 248                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 249                 };
 250         };
 251 };
 252
 253 &pcie0 {
 254         pcie@0 {
 255                 reg = <0 0 0 0 0>;
 256                 #interrupt-cells = <1>;
 257                 #size-cells = <2>;
 258                 #address-cells = <3>;
 259                 device_type = "pci";
 260
 261                 ath9k: wifi@168c,002e {
 262                         compatible = "pci168c,002e";
 263                         reg = <0 0 0 0 0>;
 264                         #gpio-cells = <2>;
 265                         gpio-controller;
 266                         qca,no-eeprom;
 267                         qca,disable-5ghz;
 268                         mtd-mac-address = <&ath9k_cal 0xf100>;
 269                         mtd-mac-address-increment = <2>;
 270                 };
 271         };
 272 };