243ab0dca05e7d702787b1ca5f550eec3f4f47f9
[openwrt/openwrt.git] / target / linux / lantiq / dts / VG3503J.dtsi
1 /include/ "vr9.dtsi"
2
3 / {
4 model = "VG3503J - BT OpenReach VDSL Modem";
5
6 chosen {
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8
9 leds {
10 boot = &power_green;
11 failsafe = &power_red;
12 running = &power_green;
13
14 internet = &dsl;
15 };
16 };
17
18 memory@0 {
19 reg = <0x0 0x2000000>;
20 };
21
22 fpi@10000000 {
23 localbus@0 {
24 ranges = <0 0 0x0 0x3ffffff>;
25 nor-boot@0 {
26 compatible = "lantiq,nor";
27 bank-width = <2>;
28 reg = <0 0x0 0x2000000>;
29 #address-cells = <1>;
30 #size-cells = <1>;
31
32 partition@0 {
33 label = "uboot";
34 reg = <0x00000 0x20000>;
35 };
36
37 partition@20000 {
38 label = "kernel";
39 reg = <0x20000 0x300000>;
40 };
41
42 partition@1a0000 {
43 label = "rootfs";
44 reg = <0x320000 0x420000>;
45 };
46
47 partition@740000 {
48 label = "btagent";
49 reg = <0x740000 0x80000>;
50 };
51
52 partition@7c0000 {
53 label = "pri_bfocus_cfg";
54 reg = <0x7c0000 0x10000>;
55 };
56
57 partition@7d0000 {
58 label = "sec_bfocus_cfg";
59 reg = <0x7d0000 0x10000>;
60 };
61
62 partition@7e0000 {
63 label = "sysconfig";
64 reg = <0x7e0000 0x10000>;
65 };
66
67 partition@7f0000 {
68 label = "misc_cfg";
69 reg = <0x7f0000 0x10000>;
70 };
71 };
72 };
73
74 gpio: pinmux@E100B10 {
75 pinctrl-names = "default";
76 pinctrl-0 = <&state_default>;
77
78 state_default: pinmux {
79 mdio {
80 lantiq,groups = "mdio";
81 lantiq,function = "mdio";
82 };
83 gphy-leds {
84 lantiq,groups = "gphy0 led0", "gphy0 led1",
85 "gphy0 led2", "gphy1 led0",
86 "gphy1 led1", "gphy1 led2";
87 lantiq,function = "gphy";
88 lantiq,pull = <2>;
89 lantiq,open-drain = <0>;
90 lantiq,output = <1>;
91 };
92 };
93 };
94
95 eth@E108000 {
96 #address-cells = <1>;
97 #size-cells = <0>;
98 compatible = "lantiq,xrx200-net";
99 reg = < 0xE108000 0x3000 /* switch */
100 0xE10B100 0x70 /* mdio */
101 0xE10B1D8 0x30 /* mii */
102 0xE10B308 0x30 /* pmac */
103 >;
104 interrupt-parent = <&icu0>;
105 interrupts = <73 72>;
106
107 interface@0 {
108 compatible = "lantiq,xrx200-pdi";
109 #address-cells = <1>;
110 #size-cells = <0>;
111 reg = <0>;
112 mac-address = [ 00 11 22 33 44 55 ];
113 lantiq,switch;
114 ethernet@2 {
115 compatible = "lantiq,xrx200-pdi-port";
116 reg = <2>;
117 phy-mode = "mii";
118 phy-handle = <&phy11>;
119 };
120 ethernet@4 {
121 compatible = "lantiq,xrx200-pdi-port";
122 reg = <4>;
123 phy-mode = "mii";
124 phy-handle = <&phy13>;
125 };
126 };
127
128 mdio@0 {
129 #address-cells = <1>;
130 #size-cells = <0>;
131 compatible = "lantiq,xrx200-mdio";
132 phy11: ethernet-phy@11 {
133 reg = <0x11>;
134 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
135 };
136 phy13: ethernet-phy@13 {
137 reg = <0x13>;
138 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
139 };
140 };
141 };
142 };
143
144 gpio-keys-polled {
145 compatible = "gpio-keys-polled";
146 #address-cells = <1>;
147 #size-cells = <0>;
148 poll-interval = <100>;
149 reset {
150 label = "reset";
151 gpios = <&gpio 6 1>;
152 linux,code = <0x198>;
153 };
154 };
155
156 gpio-leds {
157 compatible = "gpio-leds";
158
159 power_red: power2 {
160 label = "vg3503j:red:power";
161 gpios = <&gpio 14 1>;
162 };
163 dsl: dsl {
164 label = "vg3503j:green:dsl";
165 gpios = <&gpio 19 1>;
166 };
167 power_green: power {
168 label = "vg3503j:green:power";
169 gpios = <&gpio 28 1>;
170 default-state = "keep";
171 };
172 };
173 };