target/linux/lantiq/dts/VG3503J.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "VG3503J - BT OpenReach VDSL Modem";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         memory@0 {
  11                 reg = <0x0 0x2000000>;
  12         };
  13
  14         fpi@10000000 {
  15                 localbus@0 {
  16                         ranges = <0 0 0x0 0x3ffffff>;
  17                         nor-boot@0 {
  18                                 compatible = "lantiq,nor";
  19                                 bank-width = <2>;
  20                                 reg = <0 0x0 0x2000000>;
  21                                 #address-cells = <1>;
  22                                 #size-cells = <1>;
  23
  24                                 partition@0 {
  25                                         label = "uboot";
  26                                         reg = <0x00000 0x20000>;
  27                                 };
  28
  29                                 partition@20000 {
  30                                         label = "kernel";
  31                                         reg = <0x20000 0x300000>;
  32                                 };
  33
  34                                 partition@1a0000 {
  35                                         label = "rootfs";
  36                                         reg = <0x320000 0x420000>;
  37                                 };
  38
  39                                 partition@740000 {
  40                                         label = "btagent";
  41                                         reg = <0x740000 0x80000>;
  42                                 };
  43
  44                                 partition@7c0000 {
  45                                         label = "pri_bfocus_cfg";
  46                                         reg = <0x7c0000 0x10000>;
  47                                 };
  48
  49                                 partition@7d0000 {
  50                                         label = "sec_bfocus_cfg";
  51                                         reg = <0x7d0000 0x10000>;
  52                                 };
  53
  54                                 partition@7e0000 {
  55                                         label = "sysconfig";
  56                                         reg = <0x7e0000 0x10000>;
  57                                 };
  58
  59                                 partition@7f0000 {
  60                                         label = "misc_cfg";
  61                                         reg = <0x7f0000 0x10000>;
  62                                 };
  63                         };
  64                 };
  65
  66                 gpio: pinmux@E100B10 {
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&state_default>;
  69
  70                         state_default: pinmux {
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 gphy-leds {
  76                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  77                                                         "gphy0 led2", "gphy1 led0",
  78                                                         "gphy1 led1", "gphy1 led2";
  79                                         lantiq,function = "gphy";
  80                                         lantiq,pull = <2>;
  81                                         lantiq,open-drain = <0>;
  82                                         lantiq,output = <1>;
  83                                 };
  84                         };
  85                 };
  86
  87                 eth@E108000 {
  88                         #address-cells = <1>;
  89                         #size-cells = <0>;
  90                         compatible = "lantiq,xrx200-net";
  91                         reg = < 0xE108000 0x3000 /* switch */
  92                                 0xE10B100 0x70 /* mdio */
  93                                 0xE10B1D8 0x30 /* mii */
  94                                 0xE10B308 0x30 /* pmac */
  95                         >;
  96                         interrupt-parent = <&icu0>;
  97                         interrupts = <73 72>;
  98
  99                         interface@0 {
 100                                 compatible = "lantiq,xrx200-pdi";
 101                                 #address-cells = <1>;
 102                                 #size-cells = <0>;
 103                                 reg = <0>;
 104                                 mac-address = [ 00 11 22 33 44 55 ];
 105                                 lantiq,switch;
 106                                 ethernet@2 {
 107                                         compatible = "lantiq,xrx200-pdi-port";
 108                                         reg = <2>;
 109                                         phy-mode = "mii";
 110                                         phy-handle = <&phy11>;
 111                                 };
 112                                 ethernet@4 {
 113                                         compatible = "lantiq,xrx200-pdi-port";
 114                                         reg = <4>;
 115                                         phy-mode = "mii";
 116                                         phy-handle = <&phy13>;
 117                                 };
 118                         };
 119
 120                         mdio@0 {
 121                                 #address-cells = <1>;
 122                                 #size-cells = <0>;
 123                                 compatible = "lantiq,xrx200-mdio";
 124                                 phy11: ethernet-phy@11 {
 125                                         reg = <0x11>;
 126                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 127                                 };
 128                                 phy13: ethernet-phy@13 {
 129                                         reg = <0x13>;
 130                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 131                                 };
 132                         };
 133                 };
 134         };
 135
 136         gpio-keys-polled {
 137                 compatible = "gpio-keys-polled";
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 poll-interval = <100>;
 141                 reset {
 142                         label = "reset";
 143                         gpios = <&gpio 6 1>;
 144                         linux,code = <0x198>;
 145                 };
 146         };
 147
 148         gpio-leds {
 149                 compatible = "gpio-leds";
 150
 151                 power2 {
 152                         label = "power2";
 153                         gpios = <&gpio 14 1>;
 154                 };
 155                 dsl {
 156                         label = "bt:green:dsl";
 157                         gpios = <&gpio 19 1>;
 158                 };
 159                 power {
 160                         label = "power";
 161                         gpios = <&gpio 28 1>;
 162                 };
 163         };
 164 };