target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "VGV7510KW22 - o2 Box 6431";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8
   9                 leds {
  10                         boot = &power_green;
  11                         failsafe = &power_red;
  12                         running = &power_green;
  13
  14                         dsl = &dsl;
  15                         internet = &internet_green;
  16                         wifi = &wifi;
  17                 };
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         nor-boot@0 {
  27                                 compatible = "lantiq,nor";
  28                                 bank-width = <2>;
  29                                 reg = <0 0x0 0x1000000>;
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32
  33                                 boardconfig: partition@fe0000 {
  34                                         label = "board_config";
  35                                         reg = <0xfe0000 0x20000>;
  36                                         read-only;
  37                                 };
  38                         };
  39                 };
  40
  41                 gpio: pinmux@E100B10 {
  42                         pinctrl-names = "default";
  43                         pinctrl-0 = <&state_default>;
  44
  45                         state_default: pinmux {
  46                                 ip101a-rst {
  47                                         lantiq,pins = "io46";
  48                                         lantiq,output = <0>;
  49                                         lantiq,pull = <1>;
  50                                 };
  51                                 gphy-leds {
  52                                         lantiq,groups = "gphy0 led1",
  53                                                         "gphy1 led0", "gphy1 led1";
  54                                         lantiq,function = "gphy";
  55                                         lantiq,open-drain = <0>;
  56                                         lantiq,pull = <0>;
  57                                         lantiq,output = <1>;
  58                                 };
  59                                 stp {
  60                                         lantiq,groups = "stp";
  61                                         lantiq,function = "stp";
  62                                         lantiq,pull = <2>;
  63                                         lantiq,open-drain = <0>;
  64                                         lantiq,output = <1>;
  65                                 };
  66                                 mdio {
  67                                         lantiq,groups = "mdio";
  68                                         lantiq,function = "mdio";
  69                                 };
  70                                 pci-rst {
  71                                         lantiq,pins = "io21";
  72                                         lantiq,open-drain = <0>;
  73                                         lantiq,pull = <0>;
  74                                         lantiq,output = <1>;
  75                                 };
  76                                 spi {
  77                                         lantiq,groups = "spi_di", "spi_do", "spi_clk";
  78                                         lantiq,function = "spi";
  79                                 };
  80                         };
  81                 };
  82
  83                 stp: stp@E100BB0 {
  84                         compatible = "lantiq,gpio-stp-xway";
  85                         reg = <0xE100BB0 0x40>;
  86                         #gpio-cells = <2>;
  87                         gpio-controller;
  88
  89                         lantiq,shadow = <0xff>;
  90                         lantiq,groups = <0x1>;
  91                         lantiq,dsl = <0x0>;
  92                         lantiq,phy1 = <0x7>;
  93                         lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
  94                 };
  95
  96                 ifxhcd@E101000 {
  97                         status = "okay";
  98                         gpios = <&gpio 47 0>;
  99                 };
 100
 101                 pci@E105400 {
 102                         status = "okay";
 103                         lantiq,bus-clock = <33333333>;
 104                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 105                         interrupt-map = <
 106                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 107                                 >;
 108                         gpio-reset = <&gpio 21 0>;
 109                         req-mask = <0x1>;       /* GNT1 */
 110                 };
 111
 112                 pcie@d900000 {
 113                         status = "disabled";
 114                 };
 115         };
 116
 117         gphy-xrx200 {
 118                 compatible = "lantiq,phy-xrx200";
 119                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
 120                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
 121                 phys = [ 00 01 ];
 122         };
 123
 124         ralink_eep {
 125                 compatible = "ralink,eeprom";
 126                 ralink,eeprom = "RT3062.eeprom";
 127         };
 128
 129         gpio-keys-polled {
 130                 compatible = "gpio-keys-polled";
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133                 poll-interval = <100>;
 134
 135                 reset {
 136                         label = "reset";
 137                         gpios = <&gpio 6 1>;
 138                         linux,code = <0x198>;
 139                 };
 140
 141                 wps {
 142                         label = "wps";
 143                         gpios = <&gpio 9 1>;
 144                         linux,code = <0x211>;
 145                 };
 146         };
 147
 148         gpio-leds {
 149                 compatible = "gpio-leds";
 150
 151                 dsl: dsl {
 152                         label = "vgv7510kw22:green:dsl";
 153                         gpios = <&gpio 2 1>;
 154                 };
 155
 156                 internet_red {
 157                         label = "vgv7510kw22:red:internet";
 158                         gpios = <&gpio 10 1>;
 159                 };
 160
 161                 info_red {
 162                         label = "vgv7510kw22:red:info";
 163                         gpios = <&gpio 12 1>;
 164                 };
 165
 166                 power_green: power {
 167                         label = "vgv7510kw22:green:power";
 168                         gpios = <&gpio 14 1>;
 169                         default-state = "keep";
 170                 };
 171
 172                 info_green {
 173                         label = "vgv7510kw22:green:info";
 174                         gpios = <&gpio 15 1>;
 175                 };
 176
 177                 internet_green: internet_green {
 178                         label = "vgv7510kw22:green:internet";
 179                         gpios = <&gpio 19 1>;
 180                 };
 181
 182                 wifi: wifi {
 183                         label = "vgv7510kw22:green:wlan";
 184                         gpios = <&gpio 20 1>;
 185                 };
 186
 187                 power_red: power2 {
 188                         label = "vgv7510kw22:red:power";
 189                         gpios = <&gpio 28 1>;
 190                 };
 191
 192                 phone {
 193                         label = "vgv7510kw22:green:telefon";
 194                         gpios = <&gpio 29 1>;
 195                 };
 196         };
 197 };
 198
 199 &eth0 {
 200         lan: interface@0 {
 201                 compatible = "lantiq,xrx200-pdi";
 202                 #address-cells = <1>;
 203                 #size-cells = <0>;
 204                 reg = <0>;
 205                 mtd-mac-address = <&boardconfig 0x16>;
 206                 lantiq,switch;
 207
 208                 ethernet@2 {
 209                         compatible = "lantiq,xrx200-pdi-port";
 210                         reg = <2>;
 211                         phy-mode = "mii";
 212                         phy-handle = <&phy11>;
 213                 };
 214                 ethernet@3 {
 215                         compatible = "lantiq,xrx200-pdi-port";
 216                         reg = <3>;
 217                         phy-mode = "mii";
 218                         phy-handle = <&phy12>;
 219                 };
 220                 ethernet@4 {
 221                         compatible = "lantiq,xrx200-pdi-port";
 222                         reg = <4>;
 223                         phy-mode = "mii";
 224                         phy-handle = <&phy13>;
 225                 };
 226                 ethernet@5 {
 227                         compatible = "lantiq,xrx200-pdi-port";
 228                         reg = <5>;
 229                         phy-mode = "mii";
 230                         phy-handle = <&phy14>;
 231                 };
 232         };
 233
 234         mdio@0 {
 235                 #address-cells = <1>;
 236                 #size-cells = <0>;
 237                 compatible = "lantiq,xrx200-mdio";
 238
 239                 phy11: ethernet-phy@11 {
 240                         reg = <0x11>;
 241                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 242                 };
 243                 phy12: ethernet-phy@12 {
 244                         reg = <0x12>;
 245                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 246                 };
 247                 phy13: ethernet-phy@13 {
 248                         reg = <0x13>;
 249                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 250                 };
 251                 phy14: ethernet-phy@14 {
 252                         reg = <0x14>;
 253                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 254                 };
 255         };
 256 };