target/linux/lantiq/dts/VGV7519.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4
   5     model = "VGV7519 - KPN Experiabox V8";
   6
   7         chosen {
   8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   9
  10                 leds {
  11                         dsl = &broadband_yellow;
  12                         internet = &internet_yellow;
  13                         power = &power;
  14                         power2 = &power2;
  15                         wifi = &wireless_yellow;
  16                 };
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         fpi@10000000 {
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26                 compatible = "lantiq,fpi", "simple-bus";
  27                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  28                 reg = <0x10000000 0xEF00000>;
  29
  30                 localbus@0 {
  31                         #address-cells = <2>;
  32                         #size-cells = <1>;
  33                         compatible = "lantiq,localbus", "simple-bus";
  34                 };
  35
  36                 gpio: pinmux@E100B10 {
  37                         compatible = "lantiq,pinctrl-xr9";
  38                         pinctrl-names = "default";
  39                         pinctrl-0 = <&state_default>;
  40
  41                         interrupt-parent = <&icu0>;
  42                         interrupts = <166 135 66 40 41 42 38>;
  43
  44                         #gpio-cells = <2>;
  45                         gpio-controller;
  46                         reg = <0xE100B10 0xA0>;
  47
  48                         state_default: pinmux {
  49                                 stp {
  50                                         lantiq,groups = "stp";
  51                                         lantiq,function = "stp";
  52                                 };
  53                                 spi {
  54                                         lantiq,groups = "spi";
  55                                         lantiq,function = "spi";
  56                                 };
  57                                 mdio {
  58                                         lantiq,groups = "mdio";
  59                                         lantiq,function = "mdio";
  60                                 };
  61                                 gphy-leds_out {
  62                                         lantiq,pins = "io7", "io44";
  63                                         lantiq,pull = <0>;
  64                                         lantiq,output = <1>;
  65                                 };
  66                                 stp_out {
  67                                         lantiq,pins = "io4", "io5", "io6";
  68                                         lantiq,open-drain = <0>;
  69                                         lantiq,output = <1>;
  70                                         lantiq,pull = <0>;
  71                                 };
  72                                 pci-rst {
  73                                         lantiq,pins = "io21";
  74                                         lantiq,open-drain = <0>;
  75                                         lantiq,pull = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                                 gphy-leds {
  79                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  80                                         lantiq,function = "gphy";
  81                                         lantiq,open-drain = <0>;
  82                                         lantiq,pull = <0>;
  83                                         lantiq,output = <1>;
  84                                 };
  85                         };
  86                 };
  87
  88                 eth@E108000 {
  89                         #address-cells = <1>;
  90                         #size-cells = <0>;
  91                         compatible = "lantiq,xrx200-net";
  92                         reg = < 0xE108000 0x3000 /* switch */
  93                                 0xE10B100 0x70 /* mdio */
  94                                 0xE10B1D8 0x30 /* mii */
  95                                 0xE10B308 0x30 /* pmac */
  96                         >;
  97                         interrupt-parent = <&icu0>;
  98                         interrupts = <73 72>;
  99
 100                         lan: interface@0 {
 101                                 compatible = "lantiq,xrx200-pdi";
 102                                 #address-cells = <1>;
 103                                 #size-cells = <0>;
 104                                 reg = <0>;
 105                                 mac-address = [ 00 11 22 33 44 55 ];
 106
 107                                 ethernet@0 {
 108                                         compatible = "lantiq,xrx200-pdi-port";
 109                                         reg = <0>;
 110                                         phy-mode = "rgmii";
 111                                         phy-handle = <&phy0>;
 112                                 };
 113                                 ethernet@1 {
 114                                         compatible = "lantiq,xrx200-pdi-port";
 115                                         reg = <1>;
 116                                         phy-mode = "rgmii";
 117                                         phy-handle = <&phy1>;
 118                                 };
 119                                 ethernet@2 {
 120                                         compatible = "lantiq,xrx200-pdi-port";
 121                                         reg = <2>;
 122                                         phy-mode = "gmii";
 123                                         phy-handle = <&phy11>;
 124                                 };
 125                                 ethernet@4 {
 126                                         compatible = "lantiq,xrx200-pdi-port";
 127                                         reg = <4>;
 128                                         phy-mode = "gmii";
 129                                         phy-handle = <&phy13>;
 130                                 };
 131                         };
 132
 133                         wan: interface@1 {
 134                                 compatible = "lantiq,xrx200-pdi";
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                                 reg = <1>;
 138                                 mac-address = [ 00 11 22 33 44 56 ];
 139                                 lantiq,wan;
 140                                 ethernet@5 {
 141                                         compatible = "lantiq,xrx200-pdi-port";
 142                                         reg = <5>;
 143                                         phy-mode = "rgmii";
 144                                         phy-handle = <&phy5>;
 145                                 };
 146                         };
 147
 148                         mdio@0 {
 149                                 #address-cells = <1>;
 150                                 #size-cells = <0>;
 151                                 compatible = "lantiq,xrx200-mdio";
 152                                 phy0: ethernet-phy@0 {
 153                                         reg = <0x0>;
 154                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 155                                         lantiq,c45-reg-init = <1 0 0 0>;
 156                                 };
 157                                 phy1: ethernet-phy@1 {
 158                                         reg = <0x1>;
 159                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 160                                         lantiq,c45-reg-init = <1 0 0 0>;
 161                                 };
 162                                 phy5: ethernet-phy@5 {
 163                                         reg = <0x5>;
 164                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 165                                         lantiq,c45-reg-init = <1 0 0 0>;
 166                                 };
 167                                 phy11: ethernet-phy@11 {
 168                                         reg = <0x11>;
 169                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 170                                         lantiq,c45-reg-init = <1 0 0 0>;
 171                                 };
 172                                 phy13: ethernet-phy@13 {
 173                                         reg = <0x13>;
 174                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 175                                         lantiq,c45-reg-init = <1 0 0 0>;
 176                                 };
 177                         };
 178                 };
 179
 180                 stp: stp@E100BB0 {
 181                         compatible = "lantiq,gpio-stp-xway";
 182                         reg = <0xE100BB0 0x40>;
 183                         #gpio-cells = <2>;
 184                         gpio-controller;
 185
 186                         lantiq,shadow = <0xffff>;
 187                         lantiq,groups = <0x3>;
 188                         lantiq,dsl = <0x0>;
 189                         lantiq,phy1 = <0x0>;
 190                         lantiq,phy2 = <0x0>;
 191                         /* lantiq,rising; */
 192                 };
 193
 194                 ifxhcd@E101000 {
 195                         status = "okay";
 196                         gpios = <&gpio 32 0>;
 197                         lantiq,portmask = <0x3>;
 198                 };
 199
 200                 pci@E105400 {
 201                         status = "okay";
 202                         #address-cells = <3>;
 203                         #size-cells = <2>;
 204                         #interrupt-cells = <1>;
 205                         compatible = "lantiq,pci-xway";
 206                         bus-range = <0x0 0x0>;
 207                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 208                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 209                         reg = <0x7000000 0x8000         /* config space */
 210                                 0xE105400 0x400>;       /* pci bridge */
 211                         lantiq,bus-clock = <33333333>;
 212                         /*lantiq,external-clock;*/
 213                         lantiq,delay-hi = <0>; /* 0ns delay */
 214                         lantiq,delay-lo = <0>; /* 0.0ns delay */
 215                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 216                         interrupt-map = <
 217                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 218                                 >;
 219                         gpio-reset = <&gpio 21 0>;
 220                         req-mask = <0x1>;       /* GNT1 */
 221                 };
 222
 223                 pcie@d900000 {
 224                         status = "disabled";
 225                 };
 226         };
 227
 228         gphy-xrx200 {
 229                 compatible = "lantiq,phy-xrx200";
 230                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 231                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 232                 phys = [ 00 01 ];
 233         };
 234
 235         ralink_eep {
 236                 compatible = "ralink,eeprom";
 237                 ralink,eeprom = "RT2860.eeprom";
 238         };
 239
 240         gpio-keys-polled {
 241                 compatible = "gpio-keys-polled";
 242                 #address-cells = <1>;
 243                 #size-cells = <0>;
 244                 poll-interval = <100>;
 245                 reset {
 246                         label = "reset";
 247                         gpios = <&gpio 9 1>;
 248                         linux,code = <0x198>;
 249                 };
 250                 eco {
 251                         label = "eco";
 252                         gpios = <&gpio 41 1>;
 253                         linux,code = <247>;
 254                 };
 255                 rfkill {
 256                         label = "rfkill";
 257                         gpios = <&gpio 45 1>;
 258                         linux,code = <0xf7>;
 259                 };
 260                 wps {
 261                         label = "wps";
 262                         gpios = <&gpio 10 1>;
 263                         linux,code = <0x211>;
 264                 };
 265         };
 266
 267         gpio-leds {
 268                 compatible = "gpio-leds";
 269
 270                 eco {                                   /* blue */
 271                         label = "eco";
 272                         gpios = <&stp 2 1>;
 273                 };
 274                 wps_red {                               /* red */
 275                         label = "wps_red";
 276                         gpios = <&stp 3 1>;
 277                 };
 278                 wps_yellow {                            /* yellow */
 279                         label = "wps_yellow";
 280                         gpios = <&stp 4 1>;
 281                 };
 282                 upgrade {                               /* blue */
 283                         label = "upgrade";
 284                         gpios = <&stp 5 1>;
 285                 };
 286                 tv {                                    /* yellow */
 287                         label = "tv";
 288                         gpios = <&stp 6 1>;
 289                 };
 290                 internet_yellow: internet_yellow {                      /* yellow */
 291                         label = "internet_yellow";
 292                         gpios = <&stp 7 1>;
 293                 };
 294                 internet_red {                          /* red */
 295                         label = "internet_red";
 296                         gpios = <&stp 8 1>;
 297                 };
 298                 broadband_red {                         /* red */
 299                         label = "broadband_red";
 300                         gpios = <&stp 9 1>;
 301                 };
 302                 broadband_yellow: broadband_yellow {                    /* yellow */
 303                         label = "broadband_yellow";
 304                         gpios = <&stp 10 1>;
 305                 };
 306                 voice {                                 /* yellow */
 307                         label = "voice";
 308                         gpios = <&stp 11 1>;
 309                 };
 310                 wireless_red {                          /* red */
 311                         label = "wireless_red";
 312                         gpios = <&stp 12 1>;
 313                 };
 314                 wireless_yellow: wireless_yellow {                      /* yellow */
 315                         label = "wireless_yellow";
 316                         gpios = <&stp 13 1>;
 317                 };
 318                 power2: power2 {                                /* yellow */
 319                         label = "power2";
 320                         gpios = <&stp 14 1>;
 321                 };
 322                 power: power {                                  /* red */
 323                         label = "power";
 324                         gpios = <&stp 15 1>;
 325                         default-state = "on";
 326                 };
 327         };
 328 };