target/linux/lantiq/dts/VGV7519.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4
   5     model = "VGV7519 - KPN Experiabox V8";
   6
   7         chosen {
   8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   9         };
  10
  11         memory@0 {
  12                 reg = <0x0 0x4000000>;
  13         };
  14
  15         fpi@10000000 {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 compatible = "lantiq,fpi", "simple-bus";
  19                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  20                 reg = <0x10000000 0xEF00000>;
  21
  22                 localbus@0 {
  23                         #address-cells = <2>;
  24                         #size-cells = <1>;
  25                         compatible = "lantiq,localbus", "simple-bus";
  26                 };
  27
  28                 gpio: pinmux@E100B10 {
  29                         compatible = "lantiq,pinctrl-xr9";
  30                         pinctrl-names = "default";
  31                         pinctrl-0 = <&state_default>;
  32
  33                         interrupt-parent = <&icu0>;
  34                         interrupts = <166 135 66 40 41 42 38>;
  35
  36                         #gpio-cells = <2>;
  37                         gpio-controller;
  38                         reg = <0xE100B10 0xA0>;
  39
  40                         state_default: pinmux {
  41                                 stp {
  42                                         lantiq,groups = "stp";
  43                                         lantiq,function = "stp";
  44                                 };
  45                                 spi {
  46                                         lantiq,groups = "spi";
  47                                         lantiq,function = "spi";
  48                                 };
  49                                 mdio {
  50                                         lantiq,groups = "mdio";
  51                                         lantiq,function = "mdio";
  52                                 };
  53                                 gphy-leds_out {
  54                                         lantiq,pins = "io7", "io44";
  55                                         lantiq,pull = <0>;
  56                                         lantiq,output = <1>;
  57                                 };
  58                                 stp_out {
  59                                         lantiq,pins = "io4", "io5", "io6";
  60                                         lantiq,open-drain = <0>;
  61                                         lantiq,output = <1>;
  62                                         lantiq,pull = <0>;
  63                                 };
  64                                 pci-rst {
  65                                         lantiq,pins = "io21";
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,pull = <0>;
  68                                         lantiq,output = <1>;
  69                                 };
  70                                 gphy-leds {
  71                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  72                                         lantiq,function = "gphy";
  73                                         lantiq,open-drain = <0>;
  74                                         lantiq,pull = <0>;
  75                                         lantiq,output = <1>;
  76                                 };
  77                         };
  78                 };
  79
  80                 eth@E108000 {
  81                         #address-cells = <1>;
  82                         #size-cells = <0>;
  83                         compatible = "lantiq,xrx200-net";
  84                         reg = < 0xE108000 0x3000 /* switch */
  85                                 0xE10B100 0x70 /* mdio */
  86                                 0xE10B1D8 0x30 /* mii */
  87                                 0xE10B308 0x30 /* pmac */
  88                         >;
  89                         interrupt-parent = <&icu0>;
  90                         interrupts = <73 72>;
  91
  92                         lan: interface@0 {
  93                                 compatible = "lantiq,xrx200-pdi";
  94                                 #address-cells = <1>;
  95                                 #size-cells = <0>;
  96                                 reg = <0>;
  97                                 mac-address = [ 00 11 22 33 44 55 ];
  98
  99                                 ethernet@0 {
 100                                         compatible = "lantiq,xrx200-pdi-port";
 101                                         reg = <0>;
 102                                         phy-mode = "rgmii";
 103                                         phy-handle = <&phy0>;
 104                                 };
 105                                 ethernet@1 {
 106                                         compatible = "lantiq,xrx200-pdi-port";
 107                                         reg = <1>;
 108                                         phy-mode = "rgmii";
 109                                         phy-handle = <&phy1>;
 110                                 };
 111                                 ethernet@2 {
 112                                         compatible = "lantiq,xrx200-pdi-port";
 113                                         reg = <2>;
 114                                         phy-mode = "gmii";
 115                                         phy-handle = <&phy11>;
 116                                 };
 117                                 ethernet@4 {
 118                                         compatible = "lantiq,xrx200-pdi-port";
 119                                         reg = <4>;
 120                                         phy-mode = "gmii";
 121                                         phy-handle = <&phy13>;
 122                                 };
 123                         };
 124
 125                         wan: interface@1 {
 126                                 compatible = "lantiq,xrx200-pdi";
 127                                 #address-cells = <1>;
 128                                 #size-cells = <0>;
 129                                 reg = <1>;
 130                                 mac-address = [ 00 11 22 33 44 56 ];
 131                                 lantiq,wan;
 132                                 ethernet@5 {
 133                                         compatible = "lantiq,xrx200-pdi-port";
 134                                         reg = <5>;
 135                                         phy-mode = "rgmii";
 136                                         phy-handle = <&phy5>;
 137                                 };
 138                         };
 139
 140                         mdio@0 {
 141                                 #address-cells = <1>;
 142                                 #size-cells = <0>;
 143                                 compatible = "lantiq,xrx200-mdio";
 144                                 phy0: ethernet-phy@0 {
 145                                         reg = <0x0>;
 146                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 147                                         lantiq,c45-reg-init = <1 0 0 0>;
 148                                 };
 149                                 phy1: ethernet-phy@1 {
 150                                         reg = <0x1>;
 151                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 152                                         lantiq,c45-reg-init = <1 0 0 0>;
 153                                 };
 154                                 phy5: ethernet-phy@5 {
 155                                         reg = <0x5>;
 156                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 157                                         lantiq,c45-reg-init = <1 0 0 0>;
 158                                 };
 159                                 phy11: ethernet-phy@11 {
 160                                         reg = <0x11>;
 161                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 162                                         lantiq,c45-reg-init = <1 0 0 0>;
 163                                 };
 164                                 phy13: ethernet-phy@13 {
 165                                         reg = <0x13>;
 166                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 167                                         lantiq,c45-reg-init = <1 0 0 0>;
 168                                 };
 169                         };
 170                 };
 171
 172                 stp: stp@E100BB0 {
 173                         compatible = "lantiq,gpio-stp-xway";
 174                         reg = <0xE100BB0 0x40>;
 175                         #gpio-cells = <2>;
 176                         gpio-controller;
 177
 178                         lantiq,shadow = <0xffff>;
 179                         lantiq,groups = <0x3>;
 180                         lantiq,dsl = <0x0>;
 181                         lantiq,phy1 = <0x0>;
 182                         lantiq,phy2 = <0x0>;
 183                         /* lantiq,rising; */
 184                 };
 185
 186                 ifxhcd@E101000 {
 187                         status = "okay";
 188                         gpios = <&gpio 32 0>;
 189                         lantiq,portmask = <0x3>;
 190                 };
 191
 192                 pci@E105400 {
 193                         status = "okay";
 194                         #address-cells = <3>;
 195                         #size-cells = <2>;
 196                         #interrupt-cells = <1>;
 197                         compatible = "lantiq,pci-xway";
 198                         bus-range = <0x0 0x0>;
 199                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 200                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 201                         reg = <0x7000000 0x8000         /* config space */
 202                                 0xE105400 0x400>;       /* pci bridge */
 203                         lantiq,bus-clock = <33333333>;
 204                         /*lantiq,external-clock;*/
 205                         lantiq,delay-hi = <0>; /* 0ns delay */
 206                         lantiq,delay-lo = <0>; /* 0.0ns delay */
 207                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 208                         interrupt-map = <
 209                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 210                                 >;
 211                         gpio-reset = <&gpio 21 0>;
 212                         req-mask = <0x1>;       /* GNT1 */
 213                 };
 214
 215                 pcie@d900000 {
 216                         status = "disabled";
 217                 };
 218         };
 219
 220         gphy-xrx200 {
 221                 compatible = "lantiq,phy-xrx200";
 222                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 223                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 224                 phys = [ 00 01 ];
 225         };
 226
 227         ralink_eep {
 228                 compatible = "ralink,eeprom";
 229                 ralink,eeprom = "RT2860.eeprom";
 230         };
 231
 232         gpio-keys-polled {
 233                 compatible = "gpio-keys-polled";
 234                 #address-cells = <1>;
 235                 #size-cells = <0>;
 236                 poll-interval = <100>;
 237                 reset {
 238                         label = "reset";
 239                         gpios = <&gpio 9 1>;
 240                         linux,code = <0x198>;
 241                 };
 242                 eco {
 243                         label = "eco";
 244                         gpios = <&gpio 41 1>;
 245                         linux,code = <247>;
 246                 };
 247                 rfkill {
 248                         label = "rfkill";
 249                         gpios = <&gpio 45 1>;
 250                         linux,code = <0xf7>;
 251                 };
 252                 wps {
 253                         label = "wps";
 254                         gpios = <&gpio 10 1>;
 255                         linux,code = <0x211>;
 256                 };
 257         };
 258
 259         gpio-leds {
 260                 compatible = "gpio-leds";
 261
 262                 eco {                                   /* blue */
 263                         label = "eco";
 264                         gpios = <&stp 2 1>;
 265                 };
 266                 wps_red {                               /* red */
 267                         label = "wps_red";
 268                         gpios = <&stp 3 1>;
 269                 };
 270                 wps_yellow {                            /* yellow */
 271                         label = "wps_yellow";
 272                         gpios = <&stp 4 1>;
 273                 };
 274                 upgrade {                               /* blue */
 275                         label = "upgrade";
 276                         gpios = <&stp 5 1>;
 277                 };
 278                 tv {                                    /* yellow */
 279                         label = "tv";
 280                         gpios = <&stp 6 1>;
 281                 };
 282                 internet_yellow {                       /* yellow */
 283                         label = "internet_yellow";
 284                         gpios = <&stp 7 1>;
 285                 };
 286                 internet_red {                          /* red */
 287                         label = "internet_red";
 288                         gpios = <&stp 8 1>;
 289                 };
 290                 broadband_red {                         /* red */
 291                         label = "broadband_red";
 292                         gpios = <&stp 9 1>;
 293                 };
 294                 broadband_yellow {                      /* yellow */
 295                         label = "broadband_yellow";
 296                         gpios = <&stp 10 1>;
 297                 };
 298                 voice {                                 /* yellow */
 299                         label = "voice";
 300                         gpios = <&stp 11 1>;
 301                 };
 302                 wireless_red {                          /* red */
 303                         label = "wireless_red";
 304                         gpios = <&stp 12 1>;
 305                 };
 306                 wireless_yellow {                       /* yellow */
 307                         label = "wireless_yellow";
 308                         gpios = <&stp 13 1>;
 309                 };
 310                 power2 {                                /* yellow */
 311                         label = "power2";
 312                         gpios = <&stp 14 1>;
 313                 };
 314                 power {                                 /* red */
 315                         label = "power";
 316                         gpios = <&stp 15 1>;
 317                         default-state = "on";
 318                 };
 319         };
 320 };