lantiq: rename gphy firmware
[openwrt/openwrt.git] / target / linux / lantiq / dts / VGV7519.dtsi
1 #include "vr9.dtsi"
2
3 #include <dt-bindings/input/input.h>
4
5 / {
6 compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
10 };
11
12 aliases {
13 led-boot = &power_green;
14 led-failsafe = &power_red;
15 led-running = &power_green;
16
17 led-dsl = &broadband_green;
18 led-internet = &internet_green;
19 led-wifi = &wireless_green;
20 };
21
22 sram@1F000000 {
23 vmmc@107000 {
24 status = "okay";
25 gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
26 &gpio 31 GPIO_ACTIVE_HIGH //still unknown
27 &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
28 };
29 };
30
31 memory@0 {
32 reg = <0x0 0x4000000>;
33 };
34
35 fpi@10000000 {
36 localbus@0 {
37 nor-boot@0 {
38 compatible = "lantiq,nor";
39 bank-width = <2>;
40 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
41 #address-cells = <1>;
42 #size-cells = <1>;
43
44 partitions {
45 compatible = "fixed-partitions";
46 #address-cells = <1>;
47 #size-cells = <1>;
48
49 boardconfig: partition@40000 {
50 label = "board_config";
51 reg = <0x40000 0x10000>;
52 read-only;
53 };
54 };
55 };
56 };
57
58 gpio: pinmux@E100B10 {
59 pinctrl-names = "default";
60 pinctrl-0 = <&state_default>;
61
62 state_default: pinmux {
63 stp {
64 lantiq,groups = "stp";
65 lantiq,function = "stp";
66 lantiq,open-drain = <0>;
67 lantiq,output = <1>;
68 lantiq,pull = <0>;
69 };
70 mdio {
71 lantiq,groups = "mdio";
72 lantiq,function = "mdio";
73 };
74 pci-rst {
75 lantiq,pins = "io21";
76 lantiq,open-drain = <0>;
77 lantiq,pull = <0>;
78 lantiq,output = <1>;
79 };
80 gphy-leds {
81 lantiq,groups = "gphy0 led1", "gphy1 led0";
82 lantiq,function = "gphy";
83 lantiq,open-drain = <0>;
84 lantiq,pull = <0>;
85 lantiq,output = <1>;
86 };
87 };
88 };
89
90 stp: stp@E100BB0 {
91 compatible = "lantiq,gpio-stp-xway";
92 reg = <0xE100BB0 0x40>;
93 #gpio-cells = <2>;
94 gpio-controller;
95
96 lantiq,shadow = <0xffff>;
97 lantiq,groups = <0x3>;
98 lantiq,dsl = <0x0>;
99 lantiq,phy1 = <0x0>;
100 lantiq,phy2 = <0x0>;
101 /* lantiq,rising; */
102 };
103
104 ifxhcd@E101000 {
105 status = "okay";
106 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
107 lantiq,portmask = <0x3>;
108 };
109
110 ifxhcd@E106000 {
111 status = "okay";
112 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
113 };
114
115 pcie@d900000 {
116 status = "disabled";
117 };
118 };
119
120 gphy-xrx200 {
121 compatible = "lantiq,phy-xrx200";
122 firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
123 firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
124 phys = [ 00 01 ];
125 };
126
127 gpio-keys-polled {
128 compatible = "gpio-keys-polled";
129 #address-cells = <1>;
130 #size-cells = <0>;
131 poll-interval = <100>;
132 reset {
133 label = "reset";
134 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
135 linux,code = <KEY_RESTART>;
136 };
137 eco {
138 label = "eco";
139 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
140 linux,code = <BTN_0>;
141 };
142 rfkill {
143 label = "rfkill";
144 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
145 linux,code = <KEY_RFKILL>;
146 };
147 wps {
148 label = "wps";
149 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
150 linux,code = <KEY_WPS_BUTTON>;
151 };
152 };
153
154 gpio-leds {
155 compatible = "gpio-leds";
156
157 eco {
158 label = "vgv7519:blue:eco";
159 gpios = <&stp 2 GPIO_ACTIVE_LOW>;
160 };
161 wps_red {
162 label = "vgv7519:red:wps";
163 gpios = <&stp 3 GPIO_ACTIVE_LOW>;
164 };
165 wps_green {
166 label = "vgv7519:green:wps";
167 gpios = <&stp 4 GPIO_ACTIVE_LOW>;
168 };
169 upgrade {
170 label = "vgv7519:blue:upgrade";
171 gpios = <&stp 5 GPIO_ACTIVE_LOW>;
172 };
173 tv {
174 label = "vgv7519:green:tv";
175 gpios = <&stp 6 GPIO_ACTIVE_LOW>;
176 };
177 internet_green: internet_green {
178 label = "vgv7519:green:internet";
179 gpios = <&stp 7 GPIO_ACTIVE_LOW>;
180 };
181 internet_red {
182 label = "vgv7519:red:internet";
183 gpios = <&stp 8 GPIO_ACTIVE_LOW>;
184 };
185 broadband_red {
186 label = "vgv7519:red:broadband";
187 gpios = <&stp 9 GPIO_ACTIVE_LOW>;
188 };
189 broadband_green: broadband_green {
190 label = "vgv7519:green:broadband";
191 gpios = <&stp 10 GPIO_ACTIVE_LOW>;
192 };
193 voice {
194 label = "vgv7519:green:voice";
195 gpios = <&stp 11 GPIO_ACTIVE_LOW>;
196 };
197 wireless_red {
198 label = "vgv7519:red:wireless";
199 gpios = <&stp 12 GPIO_ACTIVE_LOW>;
200 };
201 wireless_green: wireless_green {
202 label = "vgv7519:green:wireless";
203 gpios = <&stp 13 GPIO_ACTIVE_LOW>;
204 };
205 power_green: power2 {
206 label = "vgv7519:green:power";
207 gpios = <&stp 14 GPIO_ACTIVE_LOW>;
208 default-state = "keep";
209 };
210 power_red: power {
211 label = "vgv7519:red:power";
212 gpios = <&stp 15 GPIO_ACTIVE_LOW>;
213 };
214 };
215 };
216
217 &pci0 {
218 status = "okay";
219 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
220
221 wifi@1814,3091 {
222 compatible = "pci1814,3091";
223 reg = <0x7000 0 0 0 0>;
224 ralink,mtd-eeprom = <&boardconfig 0x410>;
225 ralink,mtd-eeprom-swap;
226 mtd-mac-address = <&boardconfig 0x16>;
227 mtd-mac-address-increment = <1>;
228 };
229 };
230
231 &eth0 {
232 lan: interface@0 {
233 compatible = "lantiq,xrx200-pdi";
234 #address-cells = <1>;
235 #size-cells = <0>;
236 reg = <0>;
237 mtd-mac-address = <&boardconfig 0x16>;
238 mtd-mac-address-increment = <1>;
239 lantiq,switch;
240
241 ethernet@0 {
242 compatible = "lantiq,xrx200-pdi-port";
243 reg = <0>;
244 phy-mode = "rgmii";
245 phy-handle = <&phy0>;
246 };
247 ethernet@1 {
248 compatible = "lantiq,xrx200-pdi-port";
249 reg = <1>;
250 phy-mode = "rgmii";
251 phy-handle = <&phy1>;
252 };
253 ethernet@2 {
254 compatible = "lantiq,xrx200-pdi-port";
255 reg = <2>;
256 phy-mode = "gmii";
257 phy-handle = <&phy11>;
258 };
259 ethernet@4 {
260 compatible = "lantiq,xrx200-pdi-port";
261 reg = <4>;
262 phy-mode = "gmii";
263 phy-handle = <&phy13>;
264 };
265 ethernet@5 {
266 compatible = "lantiq,xrx200-pdi-port";
267 reg = <5>;
268 phy-mode = "rgmii";
269 phy-handle = <&phy5>;
270 };
271 };
272
273 mdio@0 {
274 #address-cells = <1>;
275 #size-cells = <0>;
276 compatible = "lantiq,xrx200-mdio";
277 phy0: ethernet-phy@0 {
278 reg = <0x0>;
279 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
280 };
281 phy1: ethernet-phy@1 {
282 reg = <0x1>;
283 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
284 };
285 phy5: ethernet-phy@5 {
286 reg = <0x5>;
287 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
288 };
289 phy11: ethernet-phy@11 {
290 reg = <0x11>;
291 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
292 };
293 phy13: ethernet-phy@13 {
294 reg = <0x13>;
295 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
296 };
297 };
298 };