target/linux/lantiq/dts/VR200v.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "VR200v - TP-LINK Archer VR200v";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power;
  14
  15                         dsl = &dsl;
  16                         internet = &internet;
  17                         usb = &usb;
  18                         usb2 = &usb;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x7f00000>;
  24         };
  25
  26         fpi@10000000 {
  27                 gpio: pinmux@E100B10 {
  28                         pinctrl-names = "default";
  29                         pinctrl-0 = <&state_default>;
  30
  31                         state_default: pinmux {
  32                                 mdio {
  33                                         lantiq,groups = "mdio";
  34                                         lantiq,function = "mdio";
  35                                 };
  36                                 gphy-leds {
  37                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  38                                         lantiq,function = "gphy";
  39                                         lantiq,pull = <2>;
  40                                         lantiq,open-drain = <0>;
  41                                         lantiq,output = <1>;
  42                                 };
  43                                 phy-rst {
  44                                         lantiq,pins = "io42";
  45                                         lantiq,pull = <0>;
  46                                         lantiq,open-drain = <0>;
  47                                         lantiq,output = <1>;
  48                                 };
  49                                 pcie-rst {
  50                                         lantiq,pins = "io38";
  51                                         lantiq,pull = <0>;
  52                                         lantiq,output = <1>;
  53                                 };
  54                         };
  55                         pins_spi_default: pins_spi_default {
  56                                 spi_in {
  57                                         lantiq,groups = "spi_di";
  58                                         lantiq,function = "spi";
  59                                 };
  60                                 spi_out {
  61                                         lantiq,groups = "spi_do", "spi_clk",
  62                                                 "spi_cs4";
  63                                         lantiq,function = "spi";
  64                                         lantiq,output = <1>;
  65                                 };
  66                         };
  67                 };
  68
  69                 ifxhcd@E101000 {
  70                         status = "okay";
  71                         gpios = <&gpio 33 0>;
  72                         lantiq,portmask = <0x3>;
  73                 };
  74
  75                 ifxhcd@E106000 {
  76                         status = "okay";
  77                         gpios = <&gpio 33 0>;
  78                 };
  79         };
  80
  81         gphy-xrx200 {
  82                 compatible = "lantiq,phy-xrx200";
  83                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  84                 phys = [ 00 01 ];
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <100>;
  92                 reset {
  93                         label = "reset";
  94                         gpios = <&gpio 22 1>;
  95                         linux,code = <0x198>;
  96                 };
  97
  98                 wifi {
  99                         label = "wifi";
 100                         gpios = <&gpio 0 0>;
 101                         linux,code = <0xf7>;
 102                         linux,input-type = <5>; /* EV_SW */
 103                 };
 104
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&gpio 2 1>;
 108                         linux,code = <0x211>;
 109                 };
 110
 111                 dect_paging {
 112                         label = "dect_paging";
 113                         gpios = <&gpio 39 1>;
 114                         linux,code = <0x211>;
 115                 };
 116         };
 117
 118         gpio-leds {
 119                 compatible = "gpio-leds";
 120                 power: power {
 121                         label = "vr200v:blue:power";
 122                         gpios = <&gpio 46 1>;
 123                 };
 124                 dsl: dsl {
 125                         label = "vr200v:blue:dsl";
 126                         gpios = <&gpio 4 1>;
 127                 };
 128                 internet: internet {
 129                         label = "vr200v:blue:internet";
 130                         gpios = <&gpio 5 1>;
 131                 };
 132                 usb: usb {
 133                         label = "vr200v:blue:usb";
 134                         gpios = <&gpio 25 1>;
 135                 };
 136                 eth {
 137                         label = "vr200v:blue:lan";
 138                         gpios = <&gpio 40 1>;
 139                 };
 140                 wlan {
 141                         label = "vr200v:blue:wlan";
 142                         gpios = <&gpio 24 1>;
 143                 };
 144                 wlan5g {
 145                         label = "vr200v:blue:wlan5g";
 146                         gpios = <&gpio 20 1>;
 147                 };
 148                 phone {
 149                         label = "vr200v:blue:phone";
 150                         gpios = <&gpio 44 1>;
 151                 };
 152         };
 153 };
 154
 155 &spi {
 156         pinctrl-names = "default";
 157         pinctrl-0 = <&pins_spi_default>;
 158
 159         status = "ok";
 160
 161         m25p80@4 {
 162                 #address-cells = <1>;
 163                 #size-cells = <1>;
 164                 compatible = "jedec,spi-nor";
 165                 reg = <4 0>;
 166                 spi-max-frequency = <33250000>;
 167                 m25p,fast-read;
 168
 169                 partition@0 {
 170                         reg = <0x0 0x20000>;
 171                         label = "u-boot";
 172                         read-only;
 173                 };
 174
 175                 partition@20000 {
 176                         reg = <0x20000 0xf90000>;
 177                         label = "firmware";
 178                 };
 179
 180                 partition@fb0000 {
 181                         reg = <0xfb0000 0x10000>;
 182                         label = "radioDECT";
 183                         read-only;
 184                 };
 185
 186                 partition@fc0000 {
 187                         reg = <0xfc0000 0x10000>;
 188                         label = "config";
 189                         read-only;
 190                 };
 191
 192                 romfile: partition@fd0000 {
 193                         reg = <0xfd0000 0x10000>;
 194                         label = "romfile";
 195                         read-only;
 196                 };
 197
 198                 partition@fe0000 {
 199                         reg = <0xfe0000 0x10000>;
 200                         label = "rom";
 201                         read-only;
 202                 };
 203
 204                 partition@ff0000 {
 205                         reg = <0xff0000 0x10000>;
 206                         label = "radio";
 207                         read-only;
 208                 };
 209         };
 210 };
 211
 212 &eth0 {
 213         lan: interface@0 {
 214                 compatible = "lantiq,xrx200-pdi";
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217                 reg = <0>;
 218                 mtd-mac-address = <&romfile 0xf100>;
 219                 lantiq,switch;
 220
 221                 ethernet@0 {
 222                         compatible = "lantiq,xrx200-pdi-port";
 223                         reg = <0>;
 224                         phy-mode = "rgmii";
 225                         phy-handle = <&phy0>;
 226                         // gpios = <&gpio 42 1>;
 227                 };
 228                 ethernet@5 {
 229                         compatible = "lantiq,xrx200-pdi-port";
 230                         reg = <5>;
 231                         phy-mode = "rgmii";
 232                         phy-handle = <&phy5>;
 233                 };
 234                 ethernet@2 {
 235                         compatible = "lantiq,xrx200-pdi-port";
 236                         reg = <2>;
 237                         phy-mode = "gmii";
 238                         phy-handle = <&phy11>;
 239                 };
 240                 ethernet@3 {
 241                         compatible = "lantiq,xrx200-pdi-port";
 242                         reg = <4>;
 243                         phy-mode = "gmii";
 244                         phy-handle = <&phy13>;
 245                 };
 246         };
 247
 248         mdio@0 {
 249                 #address-cells = <1>;
 250                 #size-cells = <0>;
 251                 compatible = "lantiq,xrx200-mdio";
 252                 phy0: ethernet-phy@0 {
 253                         reg = <0x0>;
 254                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 255                 };
 256                 phy5: ethernet-phy@5 {
 257                         reg = <0x5>;
 258                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 259                 };
 260                 phy11: ethernet-phy@11 {
 261                         reg = <0x11>;
 262                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 263                 };
 264                 phy13: ethernet-phy@13 {
 265                         reg = <0x13>;
 266                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 267                 };
 268         };
 269 };