target/linux/lantiq/dts/WBMR300.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "WBMR300 - Buffalo WBMR-300HPD";
   9
  10         chosen {
  11                 bootargs = "init=/etc/preinit";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_g;
  16                 led-failsafe = &diag_r;
  17                 led-running = &power_g;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &router_g;
  21                 led-wifi = &wifi_g;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x4000000>;
  26         };
  27
  28         fpi@10000000 {
  29                 gpio: pinmux@E100B10 {
  30                         pinctrl-names = "default";
  31                         pinctrl-0 = <&state_default>;
  32
  33                         state_default: pinmux {
  34                                 mdio {
  35                                         lantiq,groups = "mdio";
  36                                         lantiq,function = "mdio";
  37                                 };
  38                                 phy-rst {
  39                                         lantiq,pins = "io42";
  40                                         lantiq,pull = <0>;
  41                                         lantiq,open-drain = <0>;
  42                                         lantiq,output = <1>;
  43                                 };
  44                                 pcie-rst {
  45                                         lantiq,pins = "io38";
  46                                         lantiq,pull = <0>;
  47                                         lantiq,output = <1>;
  48                                 };
  49                         };
  50                         pins_spi_default: pins_spi_default {
  51                                 spi_in {
  52                                         lantiq,groups = "spi_di";
  53                                         lantiq,function = "spi";
  54                                 };
  55                                 spi_out {
  56                                         lantiq,groups = "spi_do", "spi_clk",
  57                                                 "spi_cs4";
  58                                         lantiq,function = "spi";
  59                                         lantiq,output = <1>;
  60                                 };
  61                         };
  62                 };
  63
  64                 ifxhcd@E101000 {
  65                         status = "okay";
  66                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  67                         lantiq,portmask = <0x3>;
  68                 };
  69
  70                 ifxhcd@E106000 {
  71                         status = "okay";
  72                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  73                 };
  74         };
  75
  76         gphy-xrx200 {
  77                 compatible = "lantiq,phy-xrx200";
  78                 firmware = "lantiq/vr9_phy22f_a2x.bin";
  79                 phys = [ 00 01 ];
  80         };
  81
  82         gpio_poweroff {
  83                 compatible = "gpio-poweroff";
  84                 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <100>;
  92
  93                 power {
  94                         label = "power";
  95                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_POWER>;
  97                 };
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 102                         linux,code = <KEY_RESTART>;
 103                 };
 104
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_WPS_BUTTON>;
 109                 };
 110
 111                 auto {
 112                         label = "auto";
 113                         gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
 114                         linux,code = <BTN_0>;
 115                         linux,input-type = <EV_SW>;
 116                 };
 117
 118                 router {
 119                         label = "router";
 120                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
 121                         linux,code = <BTN_1>;
 122                         linux,input-type = <EV_SW>;
 123                 };
 124         };
 125
 126         gpio-leds {
 127                 compatible = "gpio-leds";
 128
 129                 diag_r: diag_r {
 130                         label = "wbmr300:red:diag";
 131                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 132                         default_state = "off";
 133                 };
 134
 135                 wifi_g: wifi_g {
 136                         label = "wbmr300:green:wifi";
 137                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 138                 };
 139
 140                 dsl: dsl {
 141                         label = "dsl";
 142                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
 143                 };
 144
 145                 router_y: router_y {
 146                         label = "wbmr300:yellow:router";
 147                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 148                 };
 149
 150                 wifi_y: wifi_y {
 151                         label = "wbmr300:yellow:wifi";
 152                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
 153                 };
 154
 155                 lan1: lan1 {
 156                         label = "wbmr300:green:lan1";
 157                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
 158                 };
 159
 160                 wan: wan {
 161                         label = "wbmr300:green:wan";
 162                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
 163                 };
 164
 165                 lan3: lan3 {
 166                         label = "wbmr300:green:lan3";
 167                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
 168                 };
 169
 170                 lan2: lan2 {
 171                         label = "wbmr300:green:lan2";
 172                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 173                 };
 174
 175                 internet_g: internet_g {
 176                         label = "wbmr300:green:internet";
 177                         gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
 178                 };
 179
 180                 internet_y: internet_y {
 181                         label = "wbmr300:yellow:internet";
 182                         gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 183                 };
 184
 185                 router_g: router_g {
 186                         label = "wbmr300:green:router";
 187                         gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
 188                 };
 189
 190                 power_g: power_g {
 191                         label = "wbmr300:green:power";
 192                         gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
 193                 };
 194         };
 195 };
 196
 197 &spi {
 198         pinctrl-names = "default";
 199         pinctrl-0 = <&pins_spi_default>;
 200
 201         status = "ok";
 202         m25p80@4 {
 203                 #address-cells = <1>;
 204                 #size-cells = <1>;
 205                 compatible = "jedec,spi-nor";
 206                 reg = <4 0>;
 207                 spi-max-frequency = <20000000>;
 208
 209                 partition@0 {
 210                         reg = <0x0 0x10000>;
 211                         label = "u-boot";
 212                         read-only;
 213                 };
 214
 215                 partition@10000 {
 216                         reg = <0x10000 0x10000>;
 217                         label = "gphyfirmware";
 218                         read-only;
 219                 };
 220
 221                 partition@20000 {
 222                         reg = <0x20000 0x80000>;
 223                         label = "dsl_fw";
 224                 };
 225
 226                 partition@de0000 {
 227                         reg = <0xa0000 0xf40000>;
 228                         label = "firmware";
 229                 };
 230
 231                 partition@fe0000 {
 232                         reg = <0xfe0000 0x10000>;
 233                         label = "sysconfig";
 234                         read-only;
 235                 };
 236
 237                 partition@ff0000 {
 238                         reg = <0xff0000 0x2000>;
 239                         label = "ubootconfig";
 240                 };
 241
 242                 partition@ff3000 {
 243                         reg = <0xff3000 0x2000>;
 244                         label = "board_config";
 245                         read-only;
 246                 };
 247         };
 248 };
 249
 250 &eth0 {
 251         lan: interface@0 {
 252                 compatible = "lantiq,xrx200-pdi";
 253                 #address-cells = <1>;
 254                 #size-cells = <0>;
 255                 reg = <0>;
 256                 lantiq,switch;
 257
 258                 ethernet@1 {
 259                         compatible = "lantiq,xrx200-pdi-port";
 260                         reg = <4>;
 261                         phy-mode = "mii";
 262                         phy-handle = <&phy13>;
 263                 };
 264                 ethernet@2 {
 265                         compatible = "lantiq,xrx200-pdi-port";
 266                         reg = <5>;
 267                         phy-mode = "mii";
 268                         phy-handle = <&phy14>;
 269                 };
 270                 ethernet@3 {
 271                         compatible = "lantiq,xrx200-pdi-port";
 272                         reg = <2>;
 273                         phy-mode = "mii";
 274                         phy-handle = <&phy11>;
 275                 };
 276                 ethernet@4 {
 277                         compatible = "lantiq,xrx200-pdi-port";
 278                         reg = <3>;
 279                         phy-mode = "mii";
 280                         phy-handle = <&phy12>;
 281                 };
 282         };
 283
 284         mdio@0 {
 285                 #address-cells = <1>;
 286                 #size-cells = <0>;
 287                 compatible = "lantiq,xrx200-mdio";
 288                 phy11: ethernet-phy@11 {
 289                         reg = <0x11>;
 290                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 291                 };
 292                 phy12: ethernet-phy@12 {
 293                         reg = <0x12>;
 294                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 295                 };
 296                 phy13: ethernet-phy@13 {
 297                         reg = <0x13>;
 298                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 299                 };
 300                 phy14: ethernet-phy@14 {
 301                         reg = <0x14>;
 302                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 303                 };
 304         };
 305 };