target/linux/lantiq/dts/ar9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,ar9";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 cpu@0 {
  18                         compatible = "mips,mips34K";
  19                 };
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24         };
  25
  26         biu@1F800000 {
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29                 compatible = "lantiq,biu", "simple-bus";
  30                 reg = <0x1F800000 0x800000>;
  31                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  32
  33                 icu0: icu@80200 {
  34                         #interrupt-cells = <1>;
  35                         interrupt-controller;
  36                         compatible = "lantiq,icu";
  37                         reg = <0x80200 0x28
  38                                 0x80228 0x28
  39                                 0x80250 0x28
  40                                 0x80278 0x28
  41                                 0x802a0 0x28>;
  42                 };
  43
  44                 watchdog@803F0 {
  45                         compatible = "lantiq,wdt";
  46                         reg = <0x803F0 0x10>;
  47                 };
  48         };
  49
  50         sram@1F000000 {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 compatible = "lantiq,sram", "simple-bus";
  54                 reg = <0x1F000000 0x800000>;
  55                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  56
  57                 eiu0: eiu@101000 {
  58                         #interrupt-cells = <1>;
  59                         interrupt-controller;
  60                         compatible = "lantiq,eiu-xway";
  61                         reg = <0x101000 0x1000>;
  62                         interrupt-parent = <&icu0>;
  63                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  64                 };
  65
  66                 pmu0: pmu@102000 {
  67                         compatible = "lantiq,pmu-xway";
  68                         reg = <0x102000 0x1000>;
  69                 };
  70
  71                 cgu0: cgu@103000 {
  72                         compatible = "lantiq,cgu-xway";
  73                         reg = <0x103000 0x1000>;
  74                         #clock-cells = <1>;
  75                 };
  76
  77                 rcu0: rcu@203000 {
  78                         compatible = "lantiq,rcu-xway";
  79                         reg = <0x203000 0x1000>;
  80                 };
  81         };
  82
  83         fpi@10000000 {
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 compatible = "lantiq,fpi", "simple-bus";
  87                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  88                 reg = <0x10000000 0xEF00000>;
  89
  90                 localbus@0 {
  91                         #address-cells = <2>;
  92                         #size-cells = <1>;
  93                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  94                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  95                         compatible = "lantiq,localbus", "simple-bus";
  96                 };
  97
  98                 gptu@E100A00 {
  99                         compatible = "lantiq,gptu-xway";
 100                         reg = <0xE100A00 0x100>;
 101                         interrupt-parent = <&icu0>;
 102                         interrupts = <126 127 128 129 130 131>;
 103                 };
 104
 105                 asc0: serial@E100400 {
 106                         compatible = "lantiq,asc";
 107                         reg = <0xE100400 0x400>;
 108                         interrupt-parent = <&icu0>;
 109                         interrupts = <104 105 106>;
 110                         status = "disabled";
 111                 };
 112
 113                 spi: spi@E100800 {
 114                         compatible = "lantiq,xrx100-spi";
 115                         reg = <0xE100800 0x100>;
 116                         interrupt-parent = <&icu0>;
 117                         interrupts = <22 23 24>;
 118                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 119                                         "spi_frm";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122                         status = "disabled";
 123                 };
 124
 125                 gpio: pinmux@E100B10 {
 126                         compatible = "lantiq,xrx100-pinctrl";
 127                         #gpio-cells = <2>;
 128                         gpio-controller;
 129                         reg = <0xE100B10 0xA0>;
 130                 };
 131
 132                 asc1: serial@E100C00 {
 133                         compatible = "lantiq,asc";
 134                         reg = <0xE100C00 0x400>;
 135                         interrupt-parent = <&icu0>;
 136                         interrupts = <112 113 114>;
 137                 };
 138
 139                 ifxhcd@E101000 {
 140                         compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100";
 141                         reg = <0xE101000 0x1000
 142                                 0xE120000 0x3f000>;
 143                         interrupt-parent = <&icu0>;
 144                         interrupts = <62 91>;
 145                         dr_mode = "host";
 146                         status = "disabled";
 147                 };
 148
 149                 ifxhcd@E106000 {
 150                         compatible = "lantiq,arx100-usb";
 151                         reg = <0xE106000 0x1000
 152                                 0xE1E0000 0x3f000>;
 153                         interrupt-parent = <&icu0>;
 154                         interrupts = <91>;
 155                         dr_mode = "host";
 156                         status = "disabled";
 157                 };
 158
 159                 deu@E103100 {
 160                         compatible = "lantiq,deu-arx100";
 161                         reg = <0xE103100 0xf00>;
 162                 };
 163
 164                 dma0: dma@E104100 {
 165                         compatible = "lantiq,dma-xway";
 166                         reg = <0xE104100 0x800>;
 167                 };
 168
 169                 ebu0: ebu@E105300 {
 170                         compatible = "lantiq,ebu-xway";
 171                         reg = <0xE105300 0x100>;
 172                 };
 173
 174                 mei@E116000 {
 175                         compatible = "lantiq,mei-xway";
 176                         interrupt-parent = <&icu0>;
 177                         interrupts = <63>;
 178                 };
 179
 180                 etop@E180000 {
 181                         compatible = "lantiq,etop-xway";
 182                         reg = <0xE180000 0x40000
 183                                 0xE108000 0x200>;
 184                         interrupt-parent = <&icu0>;
 185                         interrupts = <73 72>;
 186                         mac-address = [ 00 11 22 33 44 55 ];
 187                 };
 188
 189                 ppe@E234000 {
 190                         compatible = "lantiq,ppe-arx100";
 191                         interrupt-parent = <&icu0>;
 192                         interrupts = <96>;
 193                 };
 194
 195                 pci0: pci@E105400 {
 196                         status = "disabled";
 197                         #address-cells = <3>;
 198                         #size-cells = <2>;
 199                         #interrupt-cells = <1>;
 200                         compatible = "lantiq,pci-xway";
 201                         bus-range = <0x0 0x0>;
 202                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 203                                   0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 204                         reg = <0x7000000 0x8000         /* config space */
 205                                 0xE105400 0x400>;       /* pci bridge */
 206                         lantiq,bus-clock = <33333333>;
 207                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 208                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 209                         req-mask = <0x1>;
 210                 };
 211         };
 212
 213         adsl {
 214                 compatible = "lantiq,adsl-arx100";
 215         };
 216 };