target/linux/lantiq/dts/danube.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2 #include <dt-bindings/input/input.h>
   3
   4 / {
   5         #address-cells = <1>;
   6         #size-cells = <1>;
   7         compatible = "lantiq,xway", "lantiq,danube";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  11         };
  12
  13         cpus {
  14                 cpu@0 {
  15                         compatible = "mips,mips24Kc";
  16                 };
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21         };
  22
  23         biu@1F800000 {
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26                 compatible = "lantiq,biu", "simple-bus";
  27                 reg = <0x1F800000 0x800000>;
  28                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  29
  30                 icu0: icu@80200 {
  31                         #interrupt-cells = <1>;
  32                         interrupt-controller;
  33                         compatible = "lantiq,icu";
  34                         reg = <0x80200 0x28
  35                                 0x80228 0x28
  36                                 0x80250 0x28
  37                                 0x80278 0x28
  38                                 0x802a0 0x28>;
  39                 };
  40
  41                 watchdog@803F0 {
  42                         compatible = "lantiq,wdt";
  43                         reg = <0x803F0 0x10>;
  44                 };
  45         };
  46
  47         sram@1F000000 {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "lantiq,sram", "simple-bus";
  51                 reg = <0x1F000000 0x800000>;
  52                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  53
  54                 eiu0: eiu@101000 {
  55                         #interrupt-cells = <1>;
  56                         interrupt-controller;
  57                         compatible = "lantiq,eiu-xway";
  58                         reg = <0x101000 0x1000>;
  59                         interrupt-parent = <&icu0>;
  60                         lantiq,eiu-irqs = <166 135 66>;
  61                 };
  62
  63                 pmu0: pmu@102000 {
  64                         compatible = "lantiq,pmu-xway";
  65                         reg = <0x102000 0x1000>;
  66                 };
  67
  68                 cgu0: cgu@103000 {
  69                         compatible = "lantiq,cgu-xway";
  70                         reg = <0x103000 0x1000>;
  71                         #clock-cells = <1>;
  72                 };
  73
  74                 vmmc@107000 {
  75                         status = "disabled";
  76                         compatible = "lantiq,vmmc";
  77                         reg = <0x103000 0x400>;
  78                         interrupt-parent = <&icu0>;
  79                         interrupts = <150 151 152 153 154 155>;
  80                 };
  81
  82                 rcu0: rcu@203000 {
  83                         compatible = "lantiq,rcu-xway";
  84                         reg = <0x203000 0x1000>;
  85                 };
  86         };
  87
  88         fpi@10000000 {
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91                 compatible = "lantiq,fpi", "simple-bus";
  92                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  93                 reg = <0x10000000 0xEF00000>;
  94
  95                 localbus@0 {
  96                         #address-cells = <2>;
  97                         #size-cells = <1>;
  98                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  99                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 100                         compatible = "lantiq,localbus", "simple-bus";
 101                 };
 102
 103                 gptu@E100A00 {
 104                         compatible = "lantiq,gptu-xway";
 105                         reg = <0xE100A00 0x100>;
 106                         interrupt-parent = <&icu0>;
 107                         interrupts = <126 127 128 129 130 131>;
 108                 };
 109
 110                 gpios: stp@E100BB0 {
 111                         #gpio-cells = <2>;
 112                         compatible = "lantiq,gpio-stp-xway";
 113                         gpio-controller;
 114                         reg = <0xE100BB0 0x40>;
 115                         lantiq,shadow = <0xfff>;
 116                         lantiq,groups = <0x3>;
 117                         status = "disabled";
 118                 };
 119
 120                 asc0: serial@E100400 {
 121                         compatible = "lantiq,asc";
 122                         reg = <0xE100400 0x400>;
 123                         interrupt-parent = <&icu0>;
 124                         interrupts = <104 105 106>;
 125                         status = "disabled";
 126                 };
 127
 128                 gpio: pinmux@E100B10 {
 129                         compatible = "lantiq,danube-pinctrl";
 130                         #gpio-cells = <2>;
 131                         gpio-controller;
 132                         reg = <0xE100B10 0xA0>;
 133                 };
 134
 135                 asc1: serial@E100C00 {
 136                         compatible = "lantiq,asc";
 137                         reg = <0xE100C00 0x400>;
 138                         interrupt-parent = <&icu0>;
 139                         interrupts = <112 113 114>;
 140                 };
 141
 142                 ifxhcd@E101000 {
 143                         compatible = "lantiq,ifxhcd-danube";
 144                         reg = <0xE101000 0x1000
 145                                 0xE120000 0x3f000>;
 146                         interrupt-parent = <&icu0>;
 147                         interrupts = <62>;
 148                         status = "disabled";
 149                 };
 150
 151                 deu@E103100 {
 152                         compatible = "lantiq,deu-danube";
 153                         reg = <0xE103100 0xf00>;
 154                 };
 155
 156                 dma0: dma@E104100 {
 157                         compatible = "lantiq,dma-xway";
 158                         reg = <0xE104100 0x800>;
 159                 };
 160
 161                 ebu0: ebu@E105300 {
 162                         compatible = "lantiq,ebu-xway";
 163                         reg = <0xE105300 0x100>;
 164                 };
 165
 166                 mei@E116000 {
 167                         compatible = "lantiq,mei-xway";
 168                         interrupt-parent = <&icu0>;
 169                         interrupts = <63>;
 170                 };
 171
 172                 etop@E180000 {
 173                         compatible = "lantiq,etop-xway";
 174                         reg = <0xE180000 0x40000>;
 175                         interrupt-parent = <&icu0>;
 176                         interrupts = <73 78>;
 177                         mac-address = [ 00 11 22 33 44 55 ];
 178                 };
 179
 180                 ppe@E234000 {
 181                         compatible = "lantiq,ppe-danube";
 182                         interrupt-parent = <&icu0>;
 183                         interrupts = <96>;
 184                 };
 185
 186                 pci0: pci@E105400 {
 187                         status = "disabled";
 188
 189                         #address-cells = <3>;
 190                         #size-cells = <2>;
 191                         #interrupt-cells = <1>;
 192                         compatible = "lantiq,pci-xway";
 193                         bus-range = <0x0 0x0>;
 194                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 195                                   0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 196                         reg = <0x7000000 0x8000         /* config space */
 197                                 0xE105400 0x400>;       /* pci bridge */
 198                         lantiq,bus-clock = <33333333>;
 199                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 200                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 201                         req-mask = <0x1>;
 202                 };
 203         };
 204
 205         adsl {
 206                 compatible = "lantiq,adsl-danube";
 207         };
 208 };