target/linux/lantiq/dts/vr9.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "lantiq,xway", "lantiq,vr9";
   5
   6         cpus {
   7                 cpu@0 {
   8                         compatible = "mips,mips34Kc";
   9                 };
  10         };
  11
  12         memory@0 {
  13                 device_type = "memory";
  14         };
  15
  16         biu@1F800000 {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 compatible = "lantiq,biu", "simple-bus";
  20                 reg = <0x1F800000 0x800000>;
  21                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  22
  23                 icu0: icu@80200 {
  24                         #interrupt-cells = <1>;
  25                         interrupt-controller;
  26                         compatible = "lantiq,icu";
  27                         reg = <0x80200 0x28
  28                                 0x80228 0x28
  29                                 0x80250 0x28
  30                                 0x80278 0x28
  31                                 0x802a0 0x28>;
  32                 };
  33
  34                 watchdog@803F0 {
  35                         compatible = "lantiq,wdt";
  36                         reg = <0x803F0 0x10>;
  37                 };
  38         };
  39
  40         sram@1F000000 {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "lantiq,sram", "simple-bus";
  44                 reg = <0x1F000000 0x800000>;
  45                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  46
  47                 eiu0: eiu@101000 {
  48                         #interrupt-cells = <1>;
  49                         interrupt-controller;
  50                         compatible = "lantiq,eiu-xway";
  51                         reg = <0x101000 0x1000>;
  52                         interrupt-parent = <&icu0>;
  53                         interrupts = <166 135 66 40 41 42>;
  54                 };
  55
  56                 pmu0: pmu@102000 {
  57                         compatible = "lantiq,pmu-xway";
  58                         reg = <0x102000 0x1000>;
  59                 };
  60
  61                 cgu0: cgu@103000 {
  62                         compatible = "lantiq,cgu-xway";
  63                         reg = <0x103000 0x1000>;
  64                 };
  65
  66                 dcdc@106a00 {
  67                         compatible = "lantiq,dcdc-xrx200";
  68                         reg = <0x106a00 0x200>;
  69                 };
  70
  71                 rcu0: rcu@203000 {
  72                         compatible = "lantiq,rcu-xrx200";
  73                         reg = <0x203000 0x1000>;
  74                         /* irq for thermal sensor */
  75                         interrupt-parent = <&icu0>;
  76                         interrupts = <115>;
  77                 };
  78
  79                 xbar0: xbar@400000 {
  80                         compatible = "lantiq,xbar-xway";
  81                         reg = <0x400000 0x1000>;
  82                 };
  83         };
  84
  85         fpi@10000000 {
  86                 #address-cells = <1>;
  87                 #size-cells = <1>;
  88                 compatible = "lantiq,fpi", "simple-bus";
  89                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  90                 reg = <0x10000000 0xEF00000>;
  91
  92                 localbus@0 {
  93                         #address-cells = <2>;
  94                         #size-cells = <1>;
  95                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  96                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  97                         compatible = "lantiq,localbus", "simple-bus";
  98                 };
  99
 100                 gptu@E100A00 {
 101                         compatible = "lantiq,gptu-xway";
 102                         reg = <0xE100A00 0x100>;
 103                         interrupt-parent = <&icu0>;
 104                         interrupts = <126 127 128 129 130 131>;
 105                 };
 106
 107                 asc0: serial@E100400 {
 108                         compatible = "lantiq,asc";
 109                         reg = <0xE100400 0x400>;
 110                         interrupt-parent = <&icu0>;
 111                         interrupts = <104 105 106>;
 112                         status = "disabled";
 113                 };
 114
 115                 gpio: pinmux@E100B10 {
 116                         compatible = "lantiq,xrx200-pinctrl";
 117                         #gpio-cells = <2>;
 118                         gpio-controller;
 119                         reg = <0xE100B10 0xA0>;
 120                 };
 121
 122                 asc1: serial@E100C00 {
 123                         compatible = "lantiq,asc";
 124                         reg = <0xE100C00 0x400>;
 125                         interrupt-parent = <&icu0>;
 126                         interrupts = <112 113 114>;
 127                 };
 128
 129                 deu@E103100 {
 130                         compatible = "lantiq,deu-xrx200";
 131                         reg = <0xE103100 0xf00>;
 132                 };
 133
 134                 dma0: dma@E104100 {
 135                         compatible = "lantiq,dma-xway";
 136                         reg = <0xE104100 0x800>;
 137                 };
 138
 139                 ebu0: ebu@E105300 {
 140                         compatible = "lantiq,ebu-xway";
 141                         reg = <0xE105300 0x100>;
 142                 };
 143
 144                 ifxhcd@E101000 {
 145                         status = "disabled";
 146                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 147                         reg = <0xE101000 0x1000
 148                                 0xE120000 0x3f000>;
 149                         interrupt-parent = <&icu0>;
 150                         interrupts = <62 91>;
 151                 };
 152
 153                 ifxhcd@E106000 {
 154                         status = "disabled";
 155                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 156                         reg = <0xE106000 0x1000>;
 157                         interrupt-parent = <&icu0>;
 158                         interrupts = <91>;
 159                 };
 160
 161                 mei@E116000 {
 162                         compatible = "lantiq,mei-xrx200";
 163                         reg = <0xE116000 0x9c>;
 164                         interrupt-parent = <&icu0>;
 165                         interrupts = <63>;
 166                 };
 167
 168                 ppe@E234000 {
 169                         compatible = "lantiq,ppe-xrx200";
 170                         interrupt-parent = <&icu0>;
 171                         interrupts = <96>;
 172                 };
 173
 174                 pcie@d900000 {
 175                         interrupt-parent = <&icu0>;
 176                         interrupts = <161 144>;
 177                         compatible = "lantiq,pcie-xrx200";
 178                         gpio-reset = <&gpio 38 0>;
 179                 };
 180
 181                 pci0: pci@E105400 {
 182                         #address-cells = <3>;
 183                         #size-cells = <2>;
 184                         #interrupt-cells = <1>;
 185                         compatible = "lantiq,pci-xway";
 186                         bus-range = <0x0 0x0>;
 187                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 188                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 189                         reg = <0x7000000 0x8000         /* config space */
 190                                 0xE105400 0x400>;       /* pci bridge */
 191                         status = "disabled";
 192                 };
 193         };
 194
 195         vdsl {
 196                 compatible = "lantiq,vdsl-vrx200";
 197         };
 198 };