target/linux/lantiq/files-4.9/arch/mips/boot/dts/P2812HNUF1.dts

   1 /dts-v1/;
   2
   3 #include "P2812HNUFX.dtsi"
   4
   5 / {
   6         compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
   7         model = "ZyXEL P-2812HNU-F1";
   8
   9         aliases {
  10                 led-usb = &usb1;
  11                 led-usb2 = &usb2;
  12         };
  13
  14         fpi@10000000 {
  15                 localbus@0 {
  16                         nand-parts@0 {
  17                                 compatible = "lantiq,nand-xway";
  18                                 lantiq,cs = <1>;
  19                                 bank-width = <2>;
  20                                 reg = <0 0x0 0x2000000>;
  21                                 #address-cells = <1>;
  22                                 #size-cells = <1>;
  23
  24                                 partitions {
  25                                         compatible = "fixed-partitions";
  26                                         #address-cells = <1>;
  27                                         #size-cells = <1>;
  28
  29                                         partition@0 {
  30                                                 label = "uboot";
  31                                                 reg = <0x00000 0x40000>;
  32                                         };
  33                                         partition@40000 {
  34                                                 label = "uboot-env";
  35                                                 reg = <0x40000 0x20000>;
  36                                         };
  37                                         partition@60000 {
  38                                                 label = "kernel";
  39                                                 reg = <0x60000 0x200000>;
  40                                         };
  41                                         partition@260000 {
  42                                                 label = "ubi";
  43                                                 reg = <0x260000 0x7da0000>;
  44                                         };
  45                                 };
  46                         };
  47                 };
  48
  49                 pcie@d900000 {
  50                         status = "disabled";
  51                 };
  52         };
  53
  54         gpio-leds {
  55                 usb1: usb1 {
  56                         label = "p2812hnuf1:green:usb1";
  57                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  58                 };
  59                 usb2: usb2 {
  60                         label = "p2812hnuf1:green:usb2";
  61                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  62                 };
  63         };
  64 };
  65
  66 &pci0 {
  67         wifi@1814,3062 {
  68                 compatible = "pci1814,3062";
  69                 reg = <0x7000 0 0 0 0>;
  70                 ralink,eeprom = "RT3062.eeprom";
  71         };
  72 };