a few more dts files (WIP)
[openwrt/openwrt.git] / target / linux / lantiq / image / ARV7525PW.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6 chosen {
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8 };
9
10 memory@0 {
11 reg = <0x0 0x2000000>;
12 };
13
14 fpi@10000000 {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 localbus@0 {
18 #address-cells = <2>;
19 #size-cells = <1>;
20 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
21 1 0 0x4000000 0x4000010>; /* addsel1 */
22 compatible = "lantiq,localbus", "simple-bus";
23
24 nor-boot@0 {
25 compatible = "lantiq,nor";
26 bank-width = <2>;
27 reg = <0 0x0 0x2000000>;
28 #address-cells = <1>;
29 #size-cells = <1>;
30
31 partition@0 {
32 label = "uboot";
33 reg = <0x00000 0x10000>; /* 64 KB */
34 };
35
36 partition@10000 {
37 label = "uboot_env";
38 reg = <0x10000 0x10000>; /* 64 KB */
39 };
40
41 partition@20000 {
42 label = "linux";
43 reg = <0x20000 0x3c0000>;
44 };
45
46 partition@400000 {
47 label = "boardconfig";
48 reg = <0x3f0000 0x10000>;
49 };
50 };
51 };
52
53 gpio: pinmux@E100B10 {
54 compatible = "lantiq,pinctrl-xway";
55 pinctrl-names = "default";
56 pinctrl-0 = <&state_default>;
57
58 #gpio-cells = <2>;
59 gpio-controller;
60 reg = <0xE100B10 0xA0>;
61
62 state_default: pinmux {
63 exin {
64 lantiq,groups = "exin1";
65 lantiq,function = "exin";
66 };
67 pci {
68 lantiq,groups = "gnt1", "req1";
69 lantiq,function = "pci";
70 };
71 };
72 };
73
74 adsl: dsl@E116000 {
75 compatible = "lantiq,dsl-xway";
76 interrupt-parent = <&icu0>;
77 interrupts = <63 96>;
78 };
79
80 etop@E180000 {
81 compatible = "lantiq,etop-xway";
82 reg = <0xE180000 0x40000>;
83 interrupt-parent = <&icu0>;
84 interrupts = <73 78>;
85 phy-mode = "rmii";
86 mac-address = [ 00 11 22 33 44 55 ];
87 };
88
89 pci@E105400 {
90 lantiq,bus-clock = <33333333>;
91 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
92 interrupt-map = <
93 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29
94 >;
95 gpio-reset = <&gpio 21 0>;
96 req-mask = <0x1>; /* GNT1 */
97 };
98
99 };
100
101 gpio-keys {
102 compatible = "gpio-keys1";
103 reset {
104 label = "Reset";
105 gpios = <&gpio 29 1>;
106 gpio-key,wakeup;
107 linux,code = <0x100>;
108 };
109 };
110
111 gpio-leds {
112 compatible = "gpio-leds";
113 festnetz {
114 label = "Festnetz";
115 gpios = <&gpio 4 1>;
116 default-state = "on";
117 };
118 internet {
119 label = "Internet";
120 gpios = <&gpio 5 1>;
121 default-state = "on";
122 };
123 wlan {
124 label = "WLan";
125 gpios = <&gpio 6 1>;
126 default-state = "on";
127 };
128 online {
129 label = "Online";
130 gpios = <&gpio 8 1>;
131 default-state = "on";
132 };
133 dsl {
134 label = "DSL";
135 gpios = <&gpio 9 1>;
136 default-state = "on";
137 };
138 };
139 };