target/linux/layerscape/image/armv8_64b.mk

   1 #
   2 # Copyright 2018-2020 NXP
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 define Device/Default
   9   PROFILES := Default
  10   IMAGES := firmware.bin sysupgrade.bin
  11   FILESYSTEMS := squashfs
  12   KERNEL := kernel-bin | gzip | uImage gzip
  13   KERNEL_LOADADDR := 0x80080000
  14   KERNEL_ENTRY_POINT := 0x80080000
  15   IMAGE_SIZE := 64m
  16   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
  17     append-rootfs | pad-rootfs | \
  18     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  19 endef
  20
  21 define Device/ls1012afrdm
  22   DEVICE_VENDOR := NXP
  23   DEVICE_MODEL := FRDM-LS1012A
  24   DEVICE_PACKAGES += \
  25     layerscape-ppfe \
  26     tfa-ls1012afrdm \
  27     kmod-ppfe
  28   DEVICE_DTS := freescale/fsl-ls1012a-frdm
  29   BLOCKSIZE := 256KiB
  30   IMAGE/firmware.bin := \
  31     ls-clean | \
  32     ls-append $(1)-bl2.pbl | pad-to 1M | \
  33     ls-append $(1)-fip.bin | pad-to 5M | \
  34     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  35     ls-append pfe.itb | pad-to 15M | \
  36     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  37     append-kernel | pad-to $$(BLOCKSIZE) | \
  38     append-rootfs | pad-rootfs | check-size
  39   IMAGE/sysupgrade.bin := append-kernel | pad-to $$(BLOCKSIZE) | \
  40         append-rootfs | pad-rootfs | \
  41         check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  42   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  43   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  44   SUPPORTED_DEVICES := fsl,ls1012a-frdm
  45 endef
  46 TARGET_DEVICES += ls1012afrdm
  47
  48 define Device/ls1012ardb
  49   DEVICE_VENDOR := NXP
  50   DEVICE_MODEL := LS1012A-RDB
  51   DEVICE_PACKAGES += \
  52     layerscape-ppfe \
  53     tfa-ls1012ardb \
  54     kmod-ppfe
  55   DEVICE_DTS := freescale/fsl-ls1012a-rdb
  56   IMAGE/firmware.bin := \
  57     ls-clean | \
  58     ls-append $(1)-bl2.pbl | pad-to 1M | \
  59     ls-append $(1)-fip.bin | pad-to 5M | \
  60     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  61     ls-append pfe.itb | pad-to 15M | \
  62     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  63     append-kernel | pad-to 32M | \
  64     append-rootfs | pad-rootfs | check-size
  65   SUPPORTED_DEVICES := fsl,ls1012a-rdb
  66 endef
  67 TARGET_DEVICES += ls1012ardb
  68
  69 define Device/ls1012afrwy
  70   DEVICE_VENDOR := NXP
  71   DEVICE_MODEL := FRWY-LS1012A
  72   DEVICE_PACKAGES += \
  73     layerscape-ppfe \
  74     tfa-ls1012afrwy \
  75     kmod-ppfe
  76   DEVICE_DTS := freescale/fsl-ls1012a-frwy
  77   FILESYSTEMS := ext4
  78   IMAGES := firmware.bin sdcard.img sysupgrade.bin
  79   IMAGE/firmware.bin := \
  80     ls-clean | \
  81     ls-append $(1)-bl2.pbl | pad-to 128K | \
  82     ls-append pfe.itb | pad-to 384K | \
  83     ls-append $(1)-fip.bin | pad-to 1856K | \
  84     ls-append $(1)-uboot-env.bin | pad-to 2048K | \
  85     check-size 2097153
  86   IMAGE/sdcard.img := \
  87     ls-clean | \
  88     ls-append-sdhead $(1) | pad-to 15M | \
  89     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  90     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  91     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  92   IMAGE/sysupgrade.bin := \
  93     ls-clean | \
  94     ls-append-sdhead $(1) | pad-to 16M | \
  95     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  96     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
  97   SUPPORTED_DEVICES := fsl,ls1012a-frwy-sdboot
  98 endef
  99 TARGET_DEVICES += ls1012afrwy
 100
 101 define Device/ls1043ardb
 102   DEVICE_VENDOR := NXP
 103   DEVICE_MODEL := LS1043A-RDB
 104   DEVICE_VARIANT := Default
 105   DEVICE_PACKAGES += \
 106     layerscape-fman \
 107     tfa-ls1043ardb \
 108     fmc fmc-eth-config
 109   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 110   IMAGE/firmware.bin := \
 111     ls-clean | \
 112     ls-append $(1)-bl2.pbl | pad-to 1M | \
 113     ls-append $(1)-fip.bin | pad-to 5M | \
 114     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 115     ls-append $(1)-fman.bin | pad-to 15M | \
 116     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 117     append-kernel | pad-to 32M | \
 118     append-rootfs | pad-rootfs | check-size
 119   SUPPORTED_DEVICES := fsl,ls1043a-rdb
 120 endef
 121 TARGET_DEVICES += ls1043ardb
 122
 123 define Device/ls1043ardb-sdboot
 124   DEVICE_VENDOR := NXP
 125   DEVICE_MODEL := LS1043A-RDB
 126   DEVICE_VARIANT := SD Card Boot
 127   DEVICE_PACKAGES += \
 128     layerscape-fman \
 129     tfa-ls1043ardb-sdboot \
 130     fmc fmc-eth-config
 131   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 132   FILESYSTEMS := ext4
 133   IMAGES := sdcard.img sysupgrade.bin
 134   IMAGE/sdcard.img := \
 135     ls-clean | \
 136     ls-append-sdhead $(1) | pad-to 4K | \
 137     ls-append $(1)-bl2.pbl | pad-to 1M | \
 138     ls-append $(1)-fip.bin | pad-to 5M | \
 139     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 140     ls-append ls1043ardb-fman.bin | pad-to 15M | \
 141     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 142     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 143     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 144   IMAGE/sysupgrade.bin := \
 145     ls-clean | \
 146     ls-append-sdhead $(1) | pad-to 16M | \
 147     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 148     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 149   SUPPORTED_DEVICES := fsl,ls1043a-rdb-sdboot
 150 endef
 151 TARGET_DEVICES += ls1043ardb-sdboot
 152
 153 define Device/ls1046ardb
 154   DEVICE_VENDOR := NXP
 155   DEVICE_MODEL := LS1046A-RDB
 156   DEVICE_VARIANT := Default
 157   DEVICE_PACKAGES += \
 158     layerscape-fman \
 159     tfa-ls1046ardb \
 160     fmc fmc-eth-config
 161   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 162   IMAGE/firmware.bin := \
 163     ls-clean | \
 164     ls-append $(1)-bl2.pbl | pad-to 1M | \
 165     ls-append $(1)-fip.bin | pad-to 5M | \
 166     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 167     ls-append $(1)-fman.bin | pad-to 15M | \
 168     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 169     append-kernel | pad-to 32M | \
 170     append-rootfs | pad-rootfs | check-size
 171   SUPPORTED_DEVICES := fsl,ls1046a-rdb
 172 endef
 173 TARGET_DEVICES += ls1046ardb
 174
 175 define Device/ls1046ardb-sdboot
 176   DEVICE_VENDOR := NXP
 177   DEVICE_MODEL := LS1046A-RDB
 178   DEVICE_VARIANT := SD Card Boot
 179   DEVICE_PACKAGES += \
 180     layerscape-fman \
 181     tfa-ls1046ardb-sdboot \
 182     fmc fmc-eth-config
 183   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 184   FILESYSTEMS := ext4
 185   IMAGES := sdcard.img sysupgrade.bin
 186   IMAGE/sdcard.img := \
 187     ls-clean | \
 188     ls-append-sdhead $(1) | pad-to 4K | \
 189     ls-append $(1)-bl2.pbl | pad-to 1M | \
 190     ls-append $(1)-fip.bin | pad-to 5M | \
 191     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 192     ls-append ls1046ardb-fman.bin | pad-to 15M | \
 193     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 194     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 195     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 196   IMAGE/sysupgrade.bin := \
 197     ls-clean | \
 198     ls-append-sdhead $(1) | pad-to 16M | \
 199     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 200     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 201   SUPPORTED_DEVICES := fsl,ls1046a-rdb-sdboot
 202 endef
 203 TARGET_DEVICES += ls1046ardb-sdboot
 204
 205 define Device/ls1088ardb
 206   DEVICE_VENDOR := NXP
 207   DEVICE_MODEL := LS1088A-RDB
 208   DEVICE_VARIANT := Default
 209   DEVICE_PACKAGES += \
 210     layerscape-mc \
 211     layerscape-dpl \
 212     tfa-ls1088ardb \
 213     restool
 214   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 215   IMAGE/firmware.bin := \
 216     ls-clean | \
 217     ls-append $(1)-bl2.pbl | pad-to 1M | \
 218     ls-append $(1)-fip.bin | pad-to 5M | \
 219     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 220     ls-append $(1)-mc.itb | pad-to 13M | \
 221     ls-append $(1)-dpl.dtb | pad-to 14M | \
 222     ls-append $(1)-dpc.dtb | pad-to 15M | \
 223     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 224     append-kernel | pad-to 32M | \
 225     append-rootfs | pad-rootfs | check-size
 226   SUPPORTED_DEVICES := fsl,ls1088a-rdb
 227 endef
 228 TARGET_DEVICES += ls1088ardb
 229
 230 define Device/ls1088ardb-sdboot
 231   DEVICE_VENDOR := NXP
 232   DEVICE_MODEL := LS1088A-RDB
 233   DEVICE_VARIANT := SD Card Boot
 234   DEVICE_PACKAGES += \
 235     layerscape-mc \
 236     layerscape-dpl \
 237     tfa-ls1088ardb-sdboot \
 238     restool
 239   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 240   FILESYSTEMS := ext4
 241   IMAGES := sdcard.img sysupgrade.bin
 242   IMAGE/sdcard.img := \
 243     ls-clean | \
 244     ls-append-sdhead $(1) | pad-to 4K | \
 245     ls-append $(1)-bl2.pbl | pad-to 1M | \
 246     ls-append $(1)-fip.bin | pad-to 5M | \
 247     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 248     ls-append ls1088ardb-mc.itb | pad-to 13M | \
 249     ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
 250     ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
 251     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 252     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 253     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 254   IMAGE/sysupgrade.bin := \
 255     ls-clean | \
 256     ls-append-sdhead $(1) | pad-to 16M | \
 257     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 258     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 259   SUPPORTED_DEVICES := fsl,ls1088a-rdb-sdboot
 260 endef
 261 TARGET_DEVICES += ls1088ardb-sdboot
 262
 263 define Device/ls2088ardb
 264   DEVICE_VENDOR := NXP
 265   DEVICE_MODEL := LS2088ARDB
 266   DEVICE_PACKAGES += \
 267     layerscape-mc \
 268     layerscape-dpl \
 269     tfa-ls2088ardb \
 270     restool
 271   DEVICE_DTS := freescale/fsl-ls2088a-rdb
 272   IMAGE/firmware.bin := \
 273     ls-clean | \
 274     ls-append $(1)-bl2.pbl | pad-to 1M | \
 275     ls-append $(1)-fip.bin | pad-to 5M | \
 276     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 277     ls-append $(1)-mc.itb | pad-to 13M | \
 278     ls-append $(1)-dpl.dtb | pad-to 14M | \
 279     ls-append $(1)-dpc.dtb | pad-to 15M | \
 280     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 281     append-kernel | pad-to 32M | \
 282     append-rootfs | pad-rootfs | check-size
 283   SUPPORTED_DEVICES := fsl,ls2088a-rdb
 284 endef
 285 TARGET_DEVICES += ls2088ardb
 286
 287 define Device/traverse-ls1043
 288   DEVICE_VENDOR := Traverse
 289   DEVICE_MODEL := LS1043 Boards
 290   KERNEL_NAME := Image
 291   KERNEL_SUFFIX := -kernel.itb
 292   KERNEL_INSTALL := 1
 293   FDT_LOADADDR = 0x90000000
 294   FILESYSTEMS := ubifs
 295   MKUBIFS_OPTS := -m 1 -e 262016 -c 128
 296   DEVICE_PACKAGES += \
 297     layerscape-fman \
 298     uboot-envtools \
 299     kmod-i2c-mux-pca954x \
 300     kmod-hwmon-core \
 301     kmod-gpio-pca953x kmod-input-gpio-keys-polled \
 302     kmod-rtc-isl1208
 303   DEVICE_DESCRIPTION = \
 304     Build images for Traverse LS1043 boards. This generates a single image \
 305     capable of booting on any of the boards in this family.
 306   DEVICE_DTS = freescale/traverse-ls1043s
 307   DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
 308   DEVICE_DTS_CONFIG = ls1043s
 309   KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 310   KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 311   IMAGES = root sysupgrade.bin
 312   IMAGE/root = append-rootfs
 313   IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 314   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
 315   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 316 endef
 317 TARGET_DEVICES += traverse-ls1043