target/linux/mpc85xx/image/p1020.mk

   1 define Build/MultiImage
   2         rm -rf $@.fakerd $@.new
   3
   4         dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
   5
   6         -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi -C $(1)  \
   7                 -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) -n '$(BOARD_NAME) initramfs' \
   8                 -d $@:$@.fakerd:$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.new
   9         mv $@.new $@
  10         rm -rf $@.fakerd
  11 endef
  12
  13 define Device/aerohive_hiveap-330
  14   DEVICE_VENDOR := Aerohive
  15   DEVICE_MODEL := HiveAP-330
  16   DEVICE_ALT0_VENDOR := Aerohive
  17   DEVICE_ALT0_MODEL := HiveAP-350
  18   DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-hwmon-lm70
  19   BLOCKSIZE := 128k
  20   KERNEL := kernel-bin | uImage none
  21   KERNEL_INITRAMFS := kernel-bin | uImage none
  22   KERNEL_NAME := simpleImage.hiveap-330
  23   KERNEL_SIZE := 16m
  24   IMAGES := sysupgrade.bin
  25   KERNEL_ENTRY := 0x1500000
  26   KERNEL_LOADADDR := 0x1500000
  27   # append-dtb is still needed, as otherwise u-boot bootm complains
  28   # about not having a FDT to edit.
  29   IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \
  30         append-rootfs | pad-rootfs | check-size | append-metadata
  31   IMAGE_SIZE = 63m
  32   DEVICE_COMPAT_VERSION := 2.0
  33   DEVICE_COMPAT_MESSAGE := \n$\
  34     !The partitioning of the HiveAP 330 has changed! \n$\
  35     To upgrade, please take a look at the install instructions over \
  36     at the device's wiki: <https://openwrt.org/toh/aerohive/hiveap-330> \n$\
  37     An abridged version for the console is provided here for comfort. \n$\
  38     Run the following script into a shell on the device and retry this \
  39     sysupgrade again: \n$\
  40     cat <<- "EOF" > /tmp/uboot-fix.sh; sh /tmp/uboot-fix.sh \n$\
  41     . /lib/functions.sh \n$\
  42     . /lib/functions/system.sh \n$\
  43     opkg update && opkg install uboot-envtools kmod-mtd-rw || exit 2 \n$\
  44     insmod mtd-rw i_want_a_brick=y || exit 3 \n$\
  45     echo "/dev/mtd$$$$(find_mtd_index u-boot-env) 0x0 0x20000 0x10000" > "/etc/fw_env.config" \n$\
  46     fw_setenv owrt_boot 'setenv bootargs console=ttyS0,9600;bootm 0xEC040000 - 0xEC000000' \n$\
  47     cp "/dev/mtd$$$$(find_mtd_index 'u-boot')" /tmp/uboot \n$\
  48     cp /tmp/uboot /tmp/uboot_patched \n$\
  49     strings -td < /tmp/uboot | grep '^ *[0-9]* *\\(run owrt_boot\\|setenv bootargs\\).*cp\\.l' | \n$\
  50        awk '{print $$$$1}' | \n$\
  51        while read offset; do \n$\
  52          echo -n "run owrt_boot;            " | dd of=/tmp/uboot_patched bs=1 seek=$$$${offset} conv=notrunc \n$\
  53        done \n$\
  54        mtd write /tmp/uboot_patched u-boot \n$\
  55        uci set system.@system[0].compat_version=2.0; uci commit; \n$\
  56     EOF \n$\
  57     \n$\
  58     Note that if this fails, you will need to use the serial console \n$\
  59     to re-install OpenWrt. \n$\
  60     Note that after this sysupgrade, the AP will be unavailable for 7 \n$\
  61     minutes to reformat flash."
  62
  63 endef
  64 TARGET_DEVICES += aerohive_hiveap-330
  65
  66 define Device/enterasys_ws-ap3710i
  67   DEVICE_VENDOR := Enterasys
  68   DEVICE_MODEL := WS-AP3710i
  69   BLOCKSIZE := 128k
  70   KERNEL_NAME := simpleImage.ws-ap3710i
  71   KERNEL_ENTRY := 0x1500000
  72   KERNEL_LOADADDR := 0x1500000
  73   KERNEL = kernel-bin | uImage none
  74   KERNEL_INITRAMFS := kernel-bin | uImage none
  75   IMAGES := sysupgrade.bin
  76   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  77 endef
  78 TARGET_DEVICES += enterasys_ws-ap3710i
  79
  80 define Device/extreme-networks_ws-ap3825i
  81   DEVICE_VENDOR := Extreme Networks
  82   DEVICE_MODEL := WS-AP3825i
  83   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
  84   BLOCKSIZE := 128k
  85   KERNEL_NAME := simpleImage.ws-ap3825i
  86   KERNEL_ENTRY := 0x1500000
  87   KERNEL_LOADADDR := 0x1500000
  88   KERNEL = kernel-bin | fit none $(KDIR)/image-$$(DEVICE_DTS).dtb
  89   IMAGES := sysupgrade.bin
  90   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  91 endef
  92 TARGET_DEVICES += extreme-networks_ws-ap3825i
  93
  94 define Device/hpe_msm460
  95   DEVICE_VENDOR := Hewlett-Packard
  96   DEVICE_MODEL := MSM460
  97   KERNEL = kernel-bin | fit none $(KDIR)/image-$$(DEVICE_DTS).dtb
  98   KERNEL_NAME := zImage.la3000000
  99   KERNEL_ENTRY := 0x3000000
 100   KERNEL_LOADADDR := 0x3000000
 101   BLOCKSIZE := 128k
 102   PAGESIZE := 2048
 103   SUBPAGESIZE := 2048
 104   KERNEL_IN_UBI := 1
 105   UBINIZE_OPTS := -E 5
 106   IMAGES := factory.bin sysupgrade.bin
 107   IMAGE/factory.bin := append-ubi
 108   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 109 endef
 110 TARGET_DEVICES += hpe_msm460
 111
 112 define Device/ocedo_panda
 113   DEVICE_VENDOR := OCEDO
 114   DEVICE_MODEL := Panda
 115   DEVICE_PACKAGES := kmod-rtc-ds1307
 116   KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
 117   PAGESIZE := 2048
 118   SUBPAGESIZE := 512
 119   BLOCKSIZE := 128k
 120   IMAGES := fdt.bin sysupgrade.bin
 121   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 122   IMAGE/fdt.bin := append-dtb
 123   DEVICE_COMPAT_VERSION := 1.1
 124   DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
 125 endef
 126 TARGET_DEVICES += ocedo_panda