tools: mkimage: provide dtc path during build
[openwrt/openwrt.git] / target / linux / mvebu / patches-4.9 / 106-enable-bm-on-linksys-devices.patch
1 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi
2 +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
3 @@ -59,7 +59,8 @@
4 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
5 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
6 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
7 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
8 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
9 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
10
11 internal-regs {
12 i2c@11000 {
13 @@ -88,6 +89,9 @@
14 ethernet@70000 {
15 status = "okay";
16 phy-mode = "rgmii-id";
17 + buffer-manager = <&bm>;
18 + bm,pool-long = <0>;
19 + bm,pool-short = <3>;
20 fixed-link {
21 speed = <1000>;
22 full-duplex;
23 @@ -97,6 +101,9 @@
24 ethernet@34000 {
25 status = "okay";
26 phy-mode = "sgmii";
27 + buffer-manager = <&bm>;
28 + bm,pool-long = <2>;
29 + bm,pool-short = <3>;
30 fixed-link {
31 speed = <1000>;
32 full-duplex;
33 @@ -107,6 +114,10 @@
34 status = "okay";
35 };
36
37 + bm@c8000 {
38 + status = "okay";
39 + };
40 +
41 sata@a8000 {
42 status = "okay";
43 };
44 @@ -193,6 +204,10 @@
45 };
46 };
47
48 + bm-bppi {
49 + status = "okay";
50 + };
51 +
52 pcie-controller {
53 status = "okay";
54
55 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
56 +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
57 @@ -71,7 +71,8 @@
58 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
59 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
60 MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
61 - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
62 + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
63 + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
64
65 pcie-controller {
66 status = "okay";
67 @@ -205,6 +206,9 @@
68 pinctrl-names = "default";
69 status = "okay";
70 phy-mode = "rgmii-id";
71 + buffer-manager = <&bm>;
72 + bm,pool-long = <0>;
73 + bm,pool-short = <3>;
74 fixed-link {
75 speed = <1000>;
76 full-duplex;
77 @@ -216,12 +220,19 @@
78 pinctrl-names = "default";
79 status = "okay";
80 phy-mode = "rgmii-id";
81 + buffer-manager = <&bm>;
82 + bm,pool-long = <1>;
83 + bm,pool-short = <3>;
84 fixed-link {
85 speed = <1000>;
86 full-duplex;
87 };
88 };
89
90 + bm@c0000 {
91 + status = "okay";
92 + };
93 +
94 /* USB part of the eSATA/USB 2.0 port */
95 usb@50000 {
96 status = "okay";
97 @@ -368,6 +379,10 @@
98 };
99 };
100 };
101 +
102 + bm-bppi {
103 + status = "okay";
104 + };
105 };
106
107 gpio_keys {