drop the bootscript, new u-boots won't need it

[openwrt/openwrt.git] / target / linux / omap / patches-3.12 / 103-ARM-dts-add-AM33XX-MMC-support-and-documentation.patch

Adds AM33XX MMC support for am335x-bone, am335x-evm and am335x-evmsk boards.

Also added is the DMA binding definitions based on the generic DMA request
binding.

Additional changes made to DTS:
* Interrupt, reg and compatible properties added
* ti,needs-special-hs-handling added

Signed-off-by: Matt Porter <mporter@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>

---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt      | 26 ++++++++++++++-
 arch/arm/boot/dts/am335x-bone.dts                  | 11 +++++++
 arch/arm/boot/dts/am335x-evm.dts                   |  7 ++++
 arch/arm/boot/dts/am335x-evmsk.dts                 |  7 ++++
 arch/arm/boot/dts/am33xx.dtsi                      | 38 ++++++++++++++++++++++
 5 files changed, 88 insertions(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual vol
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
 ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+dmas: List of DMA specifiers with the controller specific format
+as described in the generic DMA client binding. A tx and rx
+specifier is required.
+dma-names: List of DMA request names. These strings correspond
+1:1 with the DMA specifiers listed in dmas. The string naming is
+to be "rx" and "tx" for RX and TX DMA requests, respectively.
+
+Examples:
+
+[hwmod populated DMA resources]
+
+       mmc1: mmc@0x4809c000 {
+               compatible = "ti,omap4-hsmmc";
+               reg = <0x4809c000 0x400>;
+               ti,hwmods = "mmc1";
+               ti,dual-volt;
+               bus-width = <4>;
+               vmmc-supply = <&vmmc>; /* phandle to regulator node */
+               ti,non-removable;
+       };
+
+[generic DMA request binding]
 
-Example:
        mmc1: mmc@0x4809c000 {
                compatible = "ti,omap4-hsmmc";
                reg = <0x4809c000 0x400>;
@@ -30,4 +51,7 @@ Example:
                bus-width = <4>;
                vmmc-supply = <&vmmc>; /* phandle to regulator node */
                ti,non-removable;
+               dmas = <&edma 24
+                       &edma 25>;
+               dma-names = "tx", "rx";
        };
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -9,3 +9,14 @@
 
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-always-on;
+};
+
+&mmc1 {
+       status = "okay";
+       vmmc-supply = <&ldo3_reg>;
+};
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -477,6 +477,8 @@
                };
 
                vmmc_reg: regulator@12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3300000>;
                        regulator-always-on;
                };
        };
@@ -517,3 +519,8 @@
                ti,adc-channels = <4 5 6 7>;
        };
 };
+
+&mmc1 {
+       status = "okay";
+       vmmc-supply = <&vmmc_reg>;
+};
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -393,6 +393,8 @@
                };
 
                vmmc_reg: regulator@12 {
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3300000>;
                        regulator-always-on;
                };
        };
@@ -419,3 +421,8 @@
        phy_id = <&davinci_mdio>, <1>;
        phy-mode = "rgmii-txid";
 };
+
+&mmc1 {
+       status = "okay";
+       vmmc-supply = <&vmmc_reg>;
+};
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -240,6 +240,44 @@
                        status = "disabled";
                };
 
+               mmc1: mmc@48060000 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc1";
+                       ti,dual-volt;
+                       ti,needs-special-reset;
+                       ti,needs-special-hs-handling;
+                       dmas = <&edma 24
+                               &edma 25>;
+                       dma-names = "tx", "rx";
+                       interrupts = <64>;
+                       interrupt-parent = <&intc>;
+                       reg = <0x48060000 0x1000>;
+                       status = "disabled";
+               };
+
+               mmc2: mmc@481d8000 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc2";
+                       ti,needs-special-reset;
+                       dmas = <&edma 2
+                               &edma 3>;
+                       dma-names = "tx", "rx";
+                       interrupts = <28>;
+                       interrupt-parent = <&intc>;
+                       reg = <0x481d8000 0x1000>;
+                       status = "disabled";
+               };
+
+               mmc3: mmc@47810000 {
+                       compatible = "ti,omap4-hsmmc";
+                       ti,hwmods = "mmc3";
+                       ti,needs-special-reset;
+                       interrupts = <29>;
+                       interrupt-parent = <&intc>;
+                       reg = <0x47810000 0x1000>;
+                       status = "disabled";
+               };
+
                wdt2: wdt@44e35000 {
                        compatible = "ti,omap3-wdt";
                        ti,hwmods = "wd_timer2";