ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / hotplug.d / firmware / 10-rt2x00-eeprom
1 #!/bin/sh
2
3 rt2x00_eeprom_die() {
4 echo "rt2x00 eeprom: " "$*"
5 exit 1
6 }
7
8 rt2x00_eeprom_extract() {
9 local part=$1
10 local offset=$2
11 local count=$3
12 local mtd
13
14 . /etc/functions.sh
15
16 mtd=$(find_mtd_part $part)
17 [ -n "$mtd" ] || \
18 rt2x00_eeprom_die "no mtd device found for partition $part"
19
20 dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
21 rt2x00_eeprom_die "failed to extract from $mtd"
22 }
23
24 [ -e /lib/firmware/$FIRMWARE ] && exit 0
25
26 case "$FIRMWARE" in
27 "RT288X.eeprom" | \
28 "RT305X.eeprom")
29 . /lib/ramips.sh
30
31 local board=$(ramips_board_name)
32
33 case $board in
34 dir-300-b1 | \
35 dir-600-b1 | \
36 dir-600-b2)
37 rt2x00_eeprom_extract "devdata" 16384 272
38 ;;
39
40 rt-g32-b1)
41 rt2x00_eeprom_extract "devconf" 0 272
42 ;;
43
44 f5d8235-v1 | \
45 f5d8235-v2)
46 rt2x00_eeprom_extract "u-boot" 262144 272
47 ;;
48
49 all0256n | \
50 argus-atp52b | \
51 bc2 | \
52 esr-9753 | \
53 fonera20n | \
54 hw550-3g | \
55 mofi3500-3gn | \
56 pwh2004 | \
57 nbg-419n | \
58 nw718 | \
59 omni-emb | \
60 rt-n15 | \
61 v22rw-2x2 | \
62 w502u | \
63 wcr-150gn | \
64 whr-g300n | \
65 wl-351 | \
66 wli-tx4-ag300n | \
67 wr512-3gn | \
68 wr6202)
69 rt2x00_eeprom_extract "factory" 0 272
70 ;;
71
72 wl341v3)
73 rt2x00_eeprom_extract "board-nvram" 64880 272
74 ;;
75
76 *)
77 rt2x00_eeprom_die "board $board is not supported yet"
78 ;;
79 esac
80 ;;
81 esac