target/linux/ramips/dts/3G-6200NL.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "3G-6200N", "ralink,rt3050-soc";
   7         model = "Edimax 3g-6200n";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@3e0000 {
  54                         label = "cimage";
  55                         reg = <0x3e0000 0x20000>;
  56                         read-only;
  57                 };
  58
  59                 partition@50000 {
  60                         label = "firmware";
  61                         reg = <0x50000 0x390000>;
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 status = "okay";
  67         };
  68
  69         esw@10110000 {
  70                 status = "okay";
  71                 ralink,portmap = <0x2f>;
  72         };
  73
  74         gpio-leds {
  75                 compatible = "gpio-leds";
  76                 wlan {
  77                         label = "edimax:amber:wlan";
  78                         gpios = <&gpio0 14 1>;
  79                 };
  80         };
  81
  82         gpio-keys-polled {
  83                 compatible = "gpio-keys-polled";
  84                 #address-cells = <1>;
  85                 #size-cells = <0>;
  86                 poll-interval = <20>;
  87                 wps {
  88                         label = "wps";
  89                         gpios = <&gpio0 12 1>;
  90                         linux,code = <0x211>;
  91                 };
  92         };
  93
  94         wmac@10180000 {
  95                 status = "okay";
  96         };
  97
  98         otg@101c0000 {
  99                 status = "okay";
 100         };
 101 };