target/linux/ramips/dts/AIR3GII.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "airlive,air3gii", "ralink,rt5350-soc";
  10         model = "AirLive Air3GII";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 wlan {
  16                         label = "air3gii:green:wlan";
  17                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  18                 };
  19
  20                 mobile {
  21                         label = "air3gii:green:mobile";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         gpio-keys-polled {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 wps {
  31                         label = "wps";
  32                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                 };
  35         };
  36 };
  37
  38 &gpio0 {
  39         status = "okay";
  40 };
  41
  42 &spi0 {
  43         status = "okay";
  44
  45         m25p80@0 {
  46                 compatible = "jedec,spi-nor";
  47                 reg = <0>;
  48                 spi-max-frequency = <10000000>;
  49
  50                 partitions {
  51                         compatible = "fixed-partitions";
  52                         #address-cells = <1>;
  53                         #size-cells = <1>;
  54
  55                         partition@0 {
  56                                 label = "u-boot";
  57                                 reg = <0x0 0x30000>;
  58                                 read-only;
  59                         };
  60
  61                         partition@30000 {
  62                                 label = "u-boot-env";
  63                                 reg = <0x30000 0x10000>;
  64                                 read-only;
  65                         };
  66
  67                         factory: partition@40000 {
  68                                 label = "factory";
  69                                 reg = <0x40000 0x10000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@50000 {
  74                                 label = "firmware";
  75                                 reg = <0x50000 0x3b0000>;
  76                         };
  77                 };
  78         };
  79 };
  80
  81 &pinctrl {
  82         state_default: pinctrl0 {
  83                 gpio {
  84                         ralink,group = "i2c", "jtag", "uartf";
  85                         ralink,function = "gpio";
  86                 };
  87         };
  88 };
  89
  90 &ethernet {
  91         mtd-mac-address = <&factory 0x4>;
  92 };
  93
  94 &esw {
  95         mediatek,portmap = <0x2f>;
  96 };
  97
  98 &wmac {
  99         ralink,mtd-eeprom = <&factory 0>;
 100 };