target/linux/ramips/dts/AR725W.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 / {
   6         compatible = "AR725W", "ralink,rt2880-soc";
   7         model = "Airlink101 AR725W";
   8
   9         palmbus@300000 {
  10                 gpio0: gpio@600 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         pinctrl {
  16                 state_default: pinctrl0 {
  17                         gpio {
  18                                 ralink,group = "i2c", "spi", "uartlite";
  19                                 ralink,function = "gpio";
  20                         };
  21                 };
  22         };
  23
  24         ethernet@400000 {
  25                 status = "okay";
  26                 mtd-mac-address = <&factory 0x4>;
  27
  28                 port@0 {
  29                         phy-handle = <&phy0>;
  30                         phy-mode = "mii";
  31                 };
  32
  33                 mdio-bus {
  34                         status = "okay";
  35
  36                         phy0: ethernet-phy@0 {
  37                                 phy-mode = "mii";
  38                                 reg = <0>;
  39                         };
  40                 };
  41         };
  42
  43         wmac@480000 {
  44                 status = "okay";
  45                 ralink,mtd-eeprom = <&factory 0>;
  46         };
  47
  48         cfi@bdc00000 {
  49                 compatible = "cfi-flash";
  50                 reg = <0xbc400000 0x800000>;
  51                 bank-width = <2>;
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54
  55                 u-boot@0 {
  56                         reg = <0x0 0x30000>;
  57                         label = "u-boot";
  58                         read-only;
  59                 };
  60
  61                 u-boot-env@30000 {
  62                         reg = <0x30000 0x10000>;
  63                         label = "u-boot-env";
  64                 };
  65
  66                 factory: factory@40000 {
  67                         reg = <0x40000 0x10000>;
  68                         label = "factory";
  69                         read-only;
  70                 };
  71
  72                 firmware@50000 {
  73                         reg = <0x50000 0x3B0000>;
  74                         label = "firmware";
  75                 };
  76         };
  77
  78         gpio-leds {
  79                 compatible = "gpio-leds";
  80
  81                 status {
  82                         label = "ar725w:green:power";
  83                         gpios = <&gpio0 7 0>;
  84                 };
  85
  86                 wpsred {
  87                         label = "ar725w:red:wps";
  88                         gpios = <&gpio0 8 1>;
  89                 };
  90
  91                 wpsblue {
  92                         label = "ar725w:blue:wps";
  93                         gpios = <&gpio0 13 1>;
  94                 };
  95         };
  96
  97         gpio-keys-polled {
  98                 compatible = "gpio-keys-polled";
  99                 #address-cells = <1>;
 100                 #size-cells = <0>;
 101                 poll-interval = <100>;
 102
 103                 wps {
 104                         label = "wps";
 105                         gpios = <&gpio0 0 1>;
 106                         linux,code = <0x211>;
 107                 };
 108
 109                 reset {
 110                         label = "reset";
 111                         gpios = <&gpio0 9 1>;
 112                         linux,code = <0x198>;
 113                 };
 114         };
 115 };