target/linux/ramips/dts/AWAPN2403.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "AWAPN2403", "ralink,rt3052-soc";
   9         model = "AsiaRF AWAPN2403";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 link {
  15                         label = "awapn2403:green:wps";
  16                         gpios = <&gpio0 14 1>;
  17                 };
  18         };
  19
  20         gpio-keys-polled {
  21                 compatible = "gpio-keys-polled";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24                 poll-interval = <20>;
  25
  26                 reset {
  27                         label = "reset";
  28                         gpios = <&gpio0 0 1>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31         };
  32 };
  33
  34 &spi0 {
  35         status = "okay";
  36
  37         m25p80@0 {
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40                 compatible = "jedec,spi-nor";
  41                 reg = <0>;
  42                 linux,modalias = "m25p80", "mx25l3205d";
  43                 spi-max-frequency = <10000000>;
  44
  45                 partition@0 {
  46                         label = "u-boot";
  47                         reg = <0x0 0x30000>;
  48                         read-only;
  49                 };
  50
  51                 partition@30000 {
  52                         label = "u-boot-env";
  53                         reg = <0x30000 0x10000>;
  54                         read-only;
  55                 };
  56
  57                 factory: partition@40000 {
  58                         label = "factory";
  59                         reg = <0x40000 0x10000>;
  60                         read-only;
  61                 };
  62
  63                 partition@50000 {
  64                         label = "firmware";
  65                         reg = <0x50000 0x3b0000>;
  66                 };
  67         };
  68 };
  69
  70 &pinctrl {
  71         state_default: pinctrl0 {
  72                 gpio {
  73                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  74                         ralink,function = "gpio";
  75                 };
  76         };
  77 };
  78
  79 &esw {
  80         mediatek,portmap = <0x3e>;
  81 };
  82
  83 &wmac {
  84         ralink,mtd-eeprom = <&factory 0>;
  85 };