target/linux/ramips/dts/ArcherC2-v1.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,c2-v1", "ralink,mt7620a-soc";
  10         model = "TP-Link Archer C2 v1";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15                 led-running = &led_wps;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         pinctrl {
  24                 state_default: pinctrl0 {
  25                         gpio {
  26                                 ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
  27                                 ralink,function = "gpio";
  28                         };
  29                 };
  30         };
  31
  32         gpio-leds {
  33                 compatible = "gpio-leds";
  34
  35                 lan {
  36                         label = "c2-v1:green:lan";
  37                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 usb {
  41                         label = "c2-v1:green:usb";
  42                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  43                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  44                         linux,default-trigger = "usbport";
  45                 };
  46
  47                 led_wps: wps {
  48                         label = "c2-v1:green:wps";
  49                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wan {
  53                         label = "c2-v1:green:wan";
  54                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 wlan {
  58                         label = "c2-v1:green:wlan";
  59                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62
  63         gpio-keys {
  64                 compatible = "gpio-keys";
  65
  66                 reset_wps {
  67                         label = "reset_wps";
  68                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_RESTART>;
  70                 };
  71
  72                 rfkill {
  73                         label = "rfkill";
  74                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_RFKILL>;
  76                 };
  77         };
  78
  79         rtl8367rb {
  80                 compatible = "realtek,rtl8367b", "rtl8367b";
  81                 cpu_port = <6>;
  82                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  83                 mii-bus = <&mdio0>;
  84         };
  85 };
  86
  87 &spi0 {
  88         status = "okay";
  89
  90         m25p80@0 {
  91                 compatible = "jedec,spi-nor";
  92                 reg = <0>;
  93                 spi-max-frequency = <10000000>;
  94
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         partition@0 {
 101                                 label = "u-boot";
 102                                 reg = <0x0 0x20000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@20000 {
 107                                 label = "firmware";
 108                                 reg = <0x20000 0x7a0000>;
 109                         };
 110
 111                         partition@7c0000 {
 112                                 label = "config";
 113                                 reg = <0x7c0000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         rom: partition@7d0000 {
 118                                 label = "rom";
 119                                 reg = <0x7d0000 0x10000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@7e0000 {
 124                                 label = "romfile";
 125                                 reg = <0x7e0000 0x10000>;
 126                                 read-only;
 127                         };
 128
 129                         radio: partition@7f0000 {
 130                                 label = "radio";
 131                                 reg = <0x7f0000 0x10000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &ethernet {
 139         status = "okay";
 140         mtd-mac-address = <&rom 0xf100>;
 141         pinctrl-names = "default";
 142         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 143
 144         port@5 {
 145                 status = "okay";
 146                 mediatek,fixed-link = <1000 1 1 1>;
 147                 phy-mode = "rgmii";
 148         };
 149
 150         mdio0: mdio-bus {
 151                 status = "okay";
 152         };
 153 };
 154
 155
 156 &gpio1 {
 157         status = "okay";
 158 };
 159
 160 &gpio2 {
 161         status = "okay";
 162 };
 163
 164 &gpio3 {
 165         status = "okay";
 166 };
 167
 168 &wmac {
 169         ralink,mtd-eeprom = <&radio 0>;
 170         mtd-mac-address = <&rom 0xf100>;
 171 };
 172
 173 &ehci {
 174         status = "okay";
 175 };
 176
 177 &ohci {
 178         status = "okay";
 179 };
 180
 181 &pcie {
 182         status = "okay";
 183 };
 184
 185 &pcie0 {
 186         mt76@0,0 {
 187                 reg = <0x0000 0 0 0 0>;
 188                 mediatek,mtd-eeprom = <&radio 0x8000>;
 189         };
 190 };