target/linux/ramips/dts/CS-QR10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex CS-QR10";
   8
   9         palmbus@10000000 {
  10                 gpio0: gpio@600 {
  11                         status = "okay";
  12                 };
  13
  14                 gpio1: gpio@638 {
  15                         status = "okay";
  16                 };
  17
  18                 gpio2: gpio@660 {
  19                         status = "okay";
  20                 };
  21
  22                 gpio3: gpio@688 {
  23                         status = "okay";
  24                 };
  25
  26                 i2c@900 {
  27                         status = "okay";
  28                 };
  29
  30                 i2s: i2s@a00 {
  31                         status = "okay";
  32                         pinctrl-names = "default";
  33                         pinctrl-0 = <&pcm_i2s_pins>;
  34                 };
  35
  36                 spi@b00 {
  37                         status = "okay";
  38
  39                         m25p80@0 {
  40                                 #address-cells = <1>;
  41                                 #size-cells = <1>;
  42                                 compatible = "jedec,spi-nor";
  43                                 reg = <0 0>;
  44                                 linux,modalias = "m25p80", "mx25l6405d";
  45                                 spi-max-frequency = <10000000>;
  46
  47                                 partition@0 {
  48                                         label = "u-boot";
  49                                         reg = <0x0 0x30000>;
  50                                         read-only;
  51                                 };
  52
  53                                 partition@30000 {
  54                                         label = "u-boot-env";
  55                                         reg = <0x30000 0x10000>;
  56                                         read-only;
  57                                 };
  58
  59                                 factory: partition@40000 {
  60                                         label = "factory";
  61                                         reg = <0x40000 0x10000>;
  62                                         read-only;
  63                                 };
  64
  65                                 partition@50000 {
  66                                         label = "firmware";
  67                                         reg = <0x50000 0x7b0000>;
  68                                 };
  69                         };
  70                 };
  71
  72                 pcm@2000 {
  73                         status = "okay";
  74                 };
  75
  76                 gdma@2800 {
  77                         status = "okay";
  78                 };
  79         };
  80
  81         pinctrl {
  82                 state_default: pinctrl0 {
  83                         gpio {
  84                                 ralink,group = "spi refclk", "rgmii1";
  85                                 ralink,function = "gpio";
  86                         };
  87                         wdt {
  88                                 ralink,group = "wdt";
  89                                 ralink,function = "wdt refclk";
  90                         };
  91                 };
  92         };
  93
  94         ethernet@10100000 {
  95                 pinctrl-names = "default";
  96                 pinctrl-0 = <&ephy_pins>;
  97                 mtd-mac-address = <&factory 0x4>;
  98                 mediatek,portmap = "llllw";
  99         };
 100
 101         gsw@10110000 {
 102                 ralink,port4 = "ephy";
 103         };
 104
 105         sdhci@10130000 {
 106                 status = "okay";
 107         };
 108
 109         ehci@101c0000 {
 110                 status = "okay";
 111         };
 112
 113         ohci@101c1000 {
 114                 status = "okay";
 115         };
 116
 117         wmac@10180000 {
 118                 ralink,mtd-eeprom = <&factory 0>;
 119         };
 120
 121         pcie@10140000 {
 122                 status = "okay";
 123         };
 124
 125         sound {
 126                 compatible = "mediatek,mt7620-audio-wm8960";
 127                 model = "mt7620-wm8960";
 128                 i2s-controller = <&i2s>;
 129                 audio-routing =
 130                 "Ext Spk", "SPK_LP",
 131                 "Ext Spk", "SPK_LN",
 132                 "Ext Spk", "SPK_RP",
 133                 "Ext Spk", "SPK_RN";
 134         };
 135
 136         gpio-leds {
 137                 compatible = "gpio-leds";
 138
 139                 power {
 140                         label = "cs-qr10:red:power";
 141                         gpios = <&gpio1 4 1>;
 142                 };
 143         };
 144
 145         gpio-keys-polled {
 146                 compatible = "gpio-keys-polled";
 147                 #address-cells = <1>;
 148                 #size-cells = <0>;
 149                 poll-interval = <20>;
 150
 151                 s1 {
 152                         label = "reset";
 153                         gpios = <&gpio1 1 1>;
 154                         linux,code = <0x198>;
 155                 };
 156
 157                 s2 {
 158                         label = "wps";
 159                         gpios = <&gpio1 3 1>;
 160                         linux,code = <0x211>;
 161                 };
 162         };
 163 };