target/linux/ramips/dts/DAP-1350.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dap-1350", "ralink,rt3052-soc";
  10         model = "D-Link DAP-1350";
  11
  12         aliases {
  13                 led-boot = &led_power_blue;
  14                 led-failsafe = &led_power_blue;
  15                 led-running = &led_power_blue;
  16                 led-upgrade = &led_power_blue;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         cfi@1f000000 {
  24                 compatible = "cfi-flash";
  25                 reg = <0x1f000000 0x800000>;
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28
  29                 partitions {
  30                         compatible = "fixed-partitions";
  31                         #address-cells = <1>;
  32                         #size-cells = <1>;
  33
  34                         partition@0 {
  35                                 label = "u-boot";
  36                                 reg = <0x0 0x30000>;
  37                                 read-only;
  38                         };
  39
  40                         devdata: partition@30000 {
  41                                 label = "devdata";
  42                                 reg = <0x30000 0x10000>;
  43                                 read-only;
  44                         };
  45
  46                         partition@40000 {
  47                                 label = "devconf";
  48                                 reg = <0x40000 0x30000>;
  49                                 read-only;
  50                         };
  51
  52                         partition@70000 {
  53                                 label = "devlang";
  54                                 reg = <0x70000 0x40000>;
  55                                 read-only;
  56                         };
  57
  58                         partition@b0000 {
  59                                 compatible = "denx,uimage";
  60                                 label = "firmware";
  61                                 reg = <0xb0000 0x750000>;
  62                         };
  63                 };
  64         };
  65
  66         gpio-leds {
  67                 compatible = "gpio-leds";
  68
  69                 led_power_blue: power {
  70                         label = "dap-1350:blue:power";
  71                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 power2 {
  75                         label = "dap-1350:red:power";
  76                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 wps {
  80                         label = "dap-1350:blue:wps";
  81                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         keys {
  86                 compatible = "gpio-keys-polled";
  87                 poll-interval = <20>;
  88
  89                 reset {
  90                         label = "reset";
  91                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  92                         linux,code = <KEY_RESTART>;
  93                 };
  94
  95                 wps {
  96                         label = "wps";
  97                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  98                         linux,code = <KEY_WPS_BUTTON>;
  99                 };
 100
 101                 rt {
 102                         label = "rt";
 103                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 104                         linux,code = <BTN_0>;
 105                 };
 106
 107                 ap {
 108                         label = "ap";
 109                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 110                         linux,code = <BTN_1>;
 111                 };
 112         };
 113 };
 114
 115 &pinctrl {
 116         state_default: pinctrl0 {
 117                 gpio {
 118                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 119                         ralink,function = "gpio";
 120                 };
 121         };
 122 };
 123
 124 &ethernet {
 125         mtd-mac-address = <&devdata 0x2e>;
 126 };
 127
 128 &esw {
 129         mediatek,portmap = <0x2f>;
 130 };
 131
 132 &wmac {
 133         ralink,mtd-eeprom = <&devdata 0>;
 134 };
 135
 136 &otg {
 137         status = "okay";
 138 };