target/linux/ramips/dts/DAP-1350.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dap-1350", "ralink,rt3052-soc";
  10         model = "D-Link DAP-1350";
  11
  12         aliases {
  13                 led-status = &led_power_blue;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         cfi@1f000000 {
  21                 compatible = "cfi-flash";
  22                 reg = <0x1f000000 0x800000>;
  23                 bank-width = <2>;
  24                 device-width = <2>;
  25
  26                 partitions {
  27                         compatible = "fixed-partitions";
  28                         #address-cells = <1>;
  29                         #size-cells = <1>;
  30
  31                         partition@0 {
  32                                 label = "u-boot";
  33                                 reg = <0x0 0x30000>;
  34                                 read-only;
  35                         };
  36
  37                         devdata: partition@30000 {
  38                                 label = "devdata";
  39                                 reg = <0x30000 0x10000>;
  40                                 read-only;
  41                         };
  42
  43                         partition@40000 {
  44                                 label = "devconf";
  45                                 reg = <0x40000 0x30000>;
  46                                 read-only;
  47                         };
  48
  49                         partition@70000 {
  50                                 label = "devlang";
  51                                 reg = <0x70000 0x40000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@b0000 {
  56                                 label = "firmware";
  57                                 reg = <0xb0000 0x750000>;
  58                         };
  59                 };
  60         };
  61
  62         gpio-leds {
  63                 compatible = "gpio-leds";
  64
  65                 led_power_blue: power {
  66                         label = "dap-1350:blue:power";
  67                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 power2 {
  71                         label = "dap-1350:red:power";
  72                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wps {
  76                         label = "dap-1350:blue:wps";
  77                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80
  81         gpio-keys-polled {
  82                 compatible = "gpio-keys-polled";
  83                 poll-interval = <20>;
  84
  85                 reset {
  86                         label = "reset";
  87                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  88                         linux,code = <KEY_RESTART>;
  89                 };
  90
  91                 wps {
  92                         label = "wps";
  93                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                 };
  96
  97                 rt {
  98                         label = "rt";
  99                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 100                         linux,code = <BTN_0>;
 101                 };
 102
 103                 ap {
 104                         label = "ap";
 105                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 106                         linux,code = <BTN_1>;
 107                 };
 108         };
 109 };
 110
 111 &pinctrl {
 112         state_default: pinctrl0 {
 113                 gpio {
 114                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 115                         ralink,function = "gpio";
 116                 };
 117         };
 118 };
 119
 120 &ethernet {
 121         mtd-mac-address = <&devdata 0x2e>;
 122 };
 123
 124 &esw {
 125         mediatek,portmap = <0x2f>;
 126 };
 127
 128 &wmac {
 129         ralink,mtd-eeprom = <&devdata 0>;
 130 };
 131
 132 &otg {
 133         status = "okay";
 134 };