target/linux/ramips/dts/DB-WRT01.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
  10         model = "Planex DB-WRT01";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         label = "db-wrt01:orange:power";
  24                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 s1 {
  33                         label = "wps";
  34                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                 };
  37         };
  38 };
  39
  40 &gpio1 {
  41         status = "okay";
  42 };
  43
  44 &spi0 {
  45         status = "okay";
  46
  47         m25p80@0 {
  48                 compatible = "jedec,spi-nor";
  49                 reg = <0>;
  50                 spi-max-frequency = <10000000>;
  51
  52                 partitions {
  53                         compatible = "fixed-partitions";
  54                         #address-cells = <1>;
  55                         #size-cells = <1>;
  56
  57                         partition@0 {
  58                                 label = "u-boot";
  59                                 reg = <0x0 0x30000>;
  60                                 read-only;
  61                         };
  62
  63                         partition@30000 {
  64                                 label = "u-boot-env";
  65                                 reg = <0x30000 0x10000>;
  66                                 read-only;
  67                         };
  68
  69                         factory: partition@40000 {
  70                                 label = "factory";
  71                                 reg = <0x40000 0x10000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@50000 {
  76                                 compatible = "denx,uimage";
  77                                 label = "firmware";
  78                                 reg = <0x50000 0x7b0000>;
  79                         };
  80                 };
  81         };
  82 };
  83
  84 &pinctrl {
  85         state_default: pinctrl0 {
  86                 gpio {
  87                         ralink,group = "i2c", "spi refclk", "rgmii1";
  88                         ralink,function = "gpio";
  89                 };
  90         };
  91 };
  92
  93 &ethernet {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&ephy_pins>;
  96         mtd-mac-address = <&factory 0x4>;
  97         mediatek,portmap = "llllw";
  98 };
  99
 100 &gsw {
 101         mediatek,port4 = "ephy";
 102 };
 103
 104 &wmac {
 105         ralink,mtd-eeprom = <&factory 0>;
 106 };