target/linux/ramips/dts/DCS-930L-B1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "DCS-930L-B1", "ralink,rt5350-soc";
   9         model = "D-Link DCS-930L B1";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 power {
  15                         label = "dcs-930l-b1:red:power";
  16                         gpios = <&gpio0 17 1>;
  17                 };
  18
  19                 wps {
  20                         label = "dcs-930l-b1:blue:wps";
  21                         gpios = <&gpio0 19 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio0 0 1>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36
  37                 wps {
  38                         label = "wps";
  39                         gpios = <&gpio0 20 1>;
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                 };
  42         };
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         m25p80@0 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <10000000>;
  54
  55                 partition@0 {
  56                         label = "u-boot";
  57                         reg = <0x0 0x30000>;
  58                         read-only;
  59                 };
  60
  61                 partition@30000 {
  62                         label = "u-boot-env";
  63                         reg = <0x30000 0x10000>;
  64                         read-only;
  65                 };
  66
  67                 factory: partition@40000 {
  68                         label = "factory";
  69                         reg = <0x40000 0x10000>;
  70                         read-only;
  71                 };
  72
  73                 partition@50000 {
  74                         label = "firmware";
  75                         reg = <0x50000 0x3b0000>;
  76                 };
  77         };
  78 };
  79
  80 &pinctrl {
  81         state_default: pinctrl0 {
  82                 gpio {
  83                         ralink,group = "i2c", "jtag", "uartf", "led";
  84                         ralink,function = "gpio";
  85                 };
  86         };
  87 };
  88
  89 &ethernet {
  90         mtd-mac-address = <&factory 0x4>;
  91 };
  92
  93 &esw {
  94         mediatek,portmap = <0x2f>;
  95 };
  96
  97 &wmac {
  98         ralink,mtd-eeprom = <&factory 0>;
  99 };
 100
 101 &ehci {
 102         status = "okay";
 103 };
 104
 105 &ohci {
 106         status = "okay";
 107 };