target/linux/ramips/dts/DIR-300-B1.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-300-B1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-300 B1";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 devdata: partition@30000 {
  24                         label = "devdata";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "devconf";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x3b0000>;
  38                 };
  39         };
  40
  41         gpio-keys-polled {
  42                 compatible = "gpio-keys-polled";
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45                 poll-interval = <20>;
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio0 10 1>;
  50                         linux,code = <0x198>;
  51                 };
  52
  53                 wps {
  54                         label = "wps";
  55                         gpios = <&gpio0 0 1>;
  56                         linux,code = <0x211>;
  57                 };
  58         };
  59
  60         gpio-leds {
  61                 compatible = "gpio-leds";
  62
  63                 status {
  64                         label = "dir-300-b1:amber:status";
  65                         gpios = <&gpio0 8 1>;
  66                 };
  67
  68                 status2 {
  69                         label = "dir-300-b1:green:status";
  70                         gpios = <&gpio0 9 1>;
  71                 };
  72
  73                 wan {
  74                         label = "dir-300-b1:amber:wan";
  75                         gpios = <&gpio0 14 1>;
  76                 };
  77
  78                 wan2 {
  79                         label = "dir-300-b1:green:wan";
  80                         gpios = <&gpio0 12 1>;
  81                 };
  82
  83                 wps {
  84                         label = "dir-300-b1:blue:wps";
  85                         gpios = <&gpio0 13 1>;
  86                 };
  87         };
  88 };
  89
  90 &pinctrl {
  91         state_default: pinctrl0 {
  92                 gpio {
  93                         ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  94                         ralink,function = "gpio";
  95                 };
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&devdata 0x4004>;
 101 };
 102
 103 &esw {
 104         mediatek,portmap = <0x2f>;
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&devdata 0x4000>;
 109 };