target/linux/ramips/dts/DIR-300-B7.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
  10         model = "D-Link DIR-300 B7";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 status {
  16                         label = "dir-300-b7:green:status";
  17                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 wps {
  21                         label = "dir-300-b7:blue:wps";
  22                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         gpio-keys-polled {
  27                 compatible = "gpio-keys-polled";
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                 };
  43         };
  44 };
  45
  46 &spi0 {
  47         status = "okay";
  48
  49         m25p80@0 {
  50                 #address-cells = <1>;
  51                 #size-cells = <1>;
  52                 compatible = "jedec,spi-nor";
  53                 reg = <0>;
  54                 spi-max-frequency = <10000000>;
  55
  56                 partition@0 {
  57                         label = "u-boot";
  58                         reg = <0x0 0x30000>;
  59                         read-only;
  60                 };
  61
  62                 partition@30000 {
  63                         label = "u-boot-env";
  64                         reg = <0x30000 0x10000>;
  65                         read-only;
  66                 };
  67
  68                 factory: partition@40000 {
  69                         label = "factory";
  70                         reg = <0x40000 0x10000>;
  71                         read-only;
  72                 };
  73
  74                 partition@50000 {
  75                         label = "firmware";
  76                         reg = <0x50000 0x7b0000>;
  77                 };
  78         };
  79 };
  80
  81 &pinctrl {
  82         state_default: pinctrl0 {
  83                 gpio {
  84                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  85                         ralink,function = "gpio";
  86                 };
  87         };
  88 };
  89
  90 &ethernet {
  91         mtd-mac-address = <&factory 0x4>;
  92 };
  93
  94 &esw {
  95         mediatek,portmap = <0x2f>;
  96         mediatek,led_polarity = <0x17>;
  97 };
  98
  99 &wmac {
 100         status = "okay";
 101         ralink,led-polarity = <1>;
 102         ralink,mtd-eeprom = <&factory 0>;
 103 };