ramips: Fix support for PBR-M1 board
[openwrt/openwrt.git] / target / linux / ramips / dts / DIR-610-A1.dts
1 /dts-v1/;
2
3 /include/ "rt5350.dtsi"
4
5 / {
6 compatible = "DIR-610-A1", "ralink,rt5350-soc";
7 model = "D-Link DIR-610 A1";
8
9 palmbus@10000000 {
10 spi@b00 {
11 status = "okay";
12
13 m25p80@0 {
14 #address-cells = <1>;
15 #size-cells = <1>;
16 compatible = "f25l32pa", "m25p80";
17 reg = <0 0>;
18 linux,modalias = "m25p80";
19 spi-max-frequency = <10000000>;
20
21 partition@0 {
22 label = "u-boot";
23 reg = <0x0 0x30000>;
24 read-only;
25 };
26
27 devdata: partition@30000 {
28 label = "devdata";
29 reg = <0x30000 0x10000>;
30 read-only;
31 };
32
33 factory: partition@40000 {
34 label = "factory";
35 reg = <0x40000 0x10000>;
36 read-only;
37 };
38
39 partition@50000 {
40 label = "firmware";
41 reg = <0x50000 0x3b0000>;
42 };
43 };
44 };
45 };
46
47 pinctrl {
48 state_default: pinctrl0 {
49 gpio {
50 ralink,group = "i2c", "jtag", "uartf";
51 ralink,function = "gpio";
52 };
53 };
54 };
55
56 ethernet@10100000 {
57 mtd-mac-address = <&devdata 0x4004>;
58 };
59
60 esw@10110000 {
61 status = "okay";
62 ralink,portmap = <0x2f>;
63 ralink,led_polarity = <0x17>;
64 };
65
66 wmac@10180000 {
67 status = "okay";
68 ralink,led-polarity = <1>;
69 ralink,mtd-eeprom = <&devdata 0x4000>;
70 };
71
72 gpio-leds {
73 compatible = "gpio-leds";
74
75 status {
76 label = "dir-610-a1:green:status";
77 gpios = <&gpio0 9 1>;
78 };
79
80 wps {
81 label = "dir-610-a1:green:wps";
82 gpios = <&gpio0 13 1>;
83 };
84 };
85
86 gpio-keys-polled {
87 compatible = "gpio-keys-polled";
88 #address-cells = <1>;
89 #size-cells = <0>;
90 poll-interval = <20>;
91
92 reset {
93 label = "reset";
94 gpios = <&gpio0 10 1>;
95 linux,code = <0x198>;
96 };
97
98 wps {
99 label = "wps";
100 gpios = <&gpio0 0 1>;
101 linux,code = <0x211>;
102 };
103 };
104 };