target/linux/ramips/dts/DIR-620-A1.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "DIR-620-A1", "ralink,rt3050-soc";
   9         model = "D-Link DIR-620 A1";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x7b0000>;
  40                 };
  41         };
  42
  43         gpio-keys-polled {
  44                 compatible = "gpio-keys-polled";
  45                 #address-cells = <1>;
  46                 #size-cells = <0>;
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 10 1>;
  52                         linux,code = <KEY_RESTART>;
  53                 };
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio0 0 1>;
  58                         linux,code = <KEY_WPS_BUTTON>;
  59                 };
  60         };
  61
  62         gpio-leds {
  63                 compatible = "gpio-leds";
  64
  65                 status {
  66                         label = "dir-620-a1:amber:status";
  67                         gpios = <&gpio0 8 1>;
  68                 };
  69
  70                 status2 {
  71                         label = "dir-620-a1:green:status";
  72                         gpios = <&gpio0 9 1>;
  73                 };
  74
  75                 wan {
  76                         label = "dir-620-a1:amber:wan";
  77                         gpios = <&gpio0 14 1>;
  78                 };
  79
  80                 wan2 {
  81                         label = "dir-620-a1:green:wan";
  82                         gpios = <&gpio0 12 1>;
  83                 };
  84
  85                 wps {
  86                         label = "dir-620-a1:blue:wps";
  87                         gpios = <&gpio0 13 0>;
  88                 };
  89
  90                 wps2 {
  91                         label = "dir-620-a1:amber:wps";
  92                         gpios = <&gpio0 11 0>;
  93                 };
  94         };
  95 };
  96
  97 &pinctrl {
  98         state_default: pinctrl0 {
  99                 gpio {
 100                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 101                         ralink,function = "gpio";
 102                 };
 103         };
 104 };
 105
 106 &ethernet {
 107         mtd-mac-address = <&factory 0x4>;
 108 };
 109
 110 &esw {
 111         mediatek,portmap = <0x2f>;
 112 };
 113
 114 &wmac {
 115         ralink,mtd-eeprom = <&factory 0>;
 116 };
 117
 118 &otg {
 119         status = "okay";
 120 };