target/linux/ramips/dts/DIR-810L.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
  10         model = "D-Link DIR-810L";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys-polled";
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                         linux,code = <BTN_0>;
  27                 };
  28
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  32                         linux,code = <BTN_0>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led_power_green: power {
  40                         label = "dir-810l:green:power";
  41                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  42                 };
  43
  44                 wan {
  45                         label = "dir-810l:orange:wan";
  46                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  47                 };
  48
  49                 power2 {
  50                         label = "dir-810l:orange:power";
  51                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  52                 };
  53         };
  54 };
  55
  56 &spi0 {
  57         status = "okay";
  58
  59         m25p80@0 {
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 spi-max-frequency = <10000000>;
  63
  64                 partitions {
  65                         compatible = "fixed-partitions";
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68
  69                         partition@0 {
  70                                 label = "u-boot";
  71                                 reg = <0x0 0x30000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@30000 {
  76                                 label = "u-boot-env";
  77                                 reg = <0x30000 0x10000>;
  78                                 read-only;
  79                         };
  80
  81                         factory: partition@40000 {
  82                                 label = "factory";
  83                                 reg = <0x40000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         factory5g: partition@50000 {
  88                                 label = "factory5g";
  89                                 reg = <0x50000 0x10000>;
  90                                 read-only;
  91                         };
  92
  93                         partition@60000 {
  94                                 label = "Wolf_Config";
  95                                 reg = <0x60000 0x10000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@70000 {
 100                                 label = "MyDlink";
 101                                 reg = <0x70000 0x80000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@e0000 {
 106                                 label = "Jffs2";
 107                                 reg = <0xe0000 0x80000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@170000 {
 112                                 compatible = "denx,uimage";
 113                                 label = "firmware";
 114                                 reg = <0x170000 0x690000>;
 115                         };
 116                 };
 117         };
 118 };
 119
 120 &pinctrl {
 121         state_default: pinctrl0 {
 122                 gpio {
 123                         ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
 124                         ralink,function = "gpio";
 125                 };
 126         };
 127 };
 128
 129 &ethernet {
 130         mtd-mac-address = <&factory 0x28>;
 131         mediatek,portmap = "llllw";
 132 };
 133
 134 &gsw {
 135         mediatek,port4 = "ephy";
 136         pinctrl-names = "default";
 137         pinctrl-0 = <&ephy_pins>;
 138 };
 139
 140 &pcie {
 141         status = "okay";
 142 };
 143
 144 &wmac {
 145         ralink,mtd-eeprom = <&factory 0x0>;
 146         mtd-mac-address = <&factory 0x28>;
 147 };
 148
 149 &pcie0 {
 150         wifi@0,0 {
 151                 reg = <0x0000 0 0 0 0>;
 152                 mediatek,mtd-eeprom = <&factory 0x8000>;
 153                 ieee80211-freq-limit = <5000000 6000000>;
 154                 mtd-mac-address = <&factory 0x28>;
 155                 mtd-mac-address-increment = <2>;
 156         };
 157 };