target/linux/ramips/dts/DIR-810L.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
   7         model = "D-Link DIR-810L";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys-polled";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14
  15                 reset {
  16                         label = "reset";
  17                         gpios = <&gpio0 1 1>;
  18                         linux,code = <0x100>;
  19                 };
  20
  21                 wps {
  22                         label = "wps";
  23                         gpios = <&gpio0 2 1>;
  24                         linux,code = <0x100>;
  25                 };
  26         };
  27
  28         gpio-leds {
  29                 compatible = "gpio-leds";
  30
  31                 power {
  32                         label = "dir-810l:green:power";
  33                         gpios = <&gpio0 9 0>;
  34                 };
  35
  36                 wan {
  37                         label = "dir-810l:orange:wan";
  38                         gpios = <&gpio0 12 0>;
  39                 };
  40
  41                 status {
  42                         label = "dir-810l:orange:power";
  43                         gpios = <&gpio0 13 0>;
  44                 };
  45         };
  46 };
  47
  48 &spi0 {
  49         status = "okay";
  50
  51         m25p80@0 {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 compatible = "jedec,spi-nor";
  55                 reg = <0 0>;
  56                 linux,modalias = "m25p80";
  57                 spi-max-frequency = <10000000>;
  58
  59                 partition@0 {
  60                         label = "u-boot";
  61                         reg = <0x0 0x30000>;
  62                         read-only;
  63                 };
  64
  65                 partition@30000 {
  66                         label = "u-boot-env";
  67                         reg = <0x30000 0x10000>;
  68                         read-only;
  69                 };
  70
  71                 factory: partition@40000 {
  72                         label = "factory";
  73                         reg = <0x40000 0x10000>;
  74                         read-only;
  75                 };
  76
  77                 factory5g: partition@50000 {
  78                         label = "factory5g";
  79                         reg = <0x50000 0x10000>;
  80                         read-only;
  81                 };
  82
  83                 partition@60000 {
  84                         label = "Wolf_Config";
  85                         reg = <0x60000 0x10000>;
  86                         read-only;
  87                 };
  88
  89                 partition@70000 {
  90                         label = "MyDlink";
  91                         reg = <0x70000 0x80000>;
  92                         read-only;
  93                 };
  94
  95                 partition@e0000 {
  96                         label = "Jffs2";
  97                         reg = <0xe0000 0x80000>;
  98                         read-only;
  99                 };
 100
 101                 partition@170000 {
 102                         label = "firmware";
 103                         reg = <0x170000 0x690000>;
 104                 };
 105         };
 106 };
 107
 108 &pinctrl {
 109         state_default: pinctrl0 {
 110                 gpio {
 111                         ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
 112                         ralink,function = "gpio";
 113                 };
 114         };
 115 };
 116
 117 &ethernet {
 118         mtd-mac-address = <&factory 0x28>;
 119         mediatek,portmap = "llllw";
 120 };
 121
 122 &gsw {
 123         mediatek,port4 = "ephy";
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&ephy_pins>;
 126 };
 127
 128 &pcie {
 129         status = "okay";
 130 };
 131
 132 &wmac {
 133         ralink,mtd-eeprom = <&factory 0>;
 134 };