target/linux/ramips/dts/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
  10         model = "D-Link DIR-860L B1";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x8000000>;
  22         };
  23
  24         chosen {
  25                 bootargs = "console=ttyS0,57600";
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 power {
  32                         label = "dir-860l-b1:orange:power";
  33                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 led_power_green: power2 {
  37                         label = "dir-860l-b1:green:power";
  38                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 net {
  42                         label = "dir-860l-b1:orange:net";
  43                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 net2 {
  47                         label = "dir-860l-b1:green:net";
  48                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  49                 };
  50         };
  51
  52         keys {
  53                 compatible = "gpio-keys-polled";
  54                 poll-interval = <20>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67         };
  68 };
  69
  70 &spi0 {
  71         status = "okay";
  72
  73         m25p80@0 {
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <10000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         partition@0 {
  84                                 label = "u-boot";
  85                                 reg = <0x0 0x30000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@30000 {
  90                                 label = "u-boot-env";
  91                                 reg = <0x30000 0x4000>;
  92                                 read-only;
  93                         };
  94
  95                         radio: partition@34000 {
  96                                 label = "radio";
  97                                 reg = <0x34000 0x4000>;
  98                                 read-only;
  99                         };
 100
 101                         factory: partition@38000 {
 102                                 label = "factory";
 103                                 reg = <0x38000 0x8000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@40000 {
 108                                 label = "defaults";
 109                                 reg = <0x40000 0x10000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@50000 {
 114                                 compatible = "seama";
 115                                 label = "firmware";
 116                                 reg = <0x50000 0xfb0000>;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &pcie {
 123         status = "okay";
 124 };
 125
 126 &pcie0 {
 127         mt76@0,0 {
 128                 reg = <0x0000 0 0 0 0>;
 129                 mediatek,mtd-eeprom = <&radio 0x2000>;
 130                 ieee80211-freq-limit = <5000000 6000000>;
 131         };
 132 };
 133
 134 &pcie1 {
 135         mt76@0,0 {
 136                 reg = <0x0000 0 0 0 0>;
 137                 mediatek,mtd-eeprom = <&radio 0>;
 138                 ieee80211-freq-limit = <2400000 2500000>;
 139         };
 140 };
 141
 142 &pinctrl {
 143         state_default: pinctrl0 {
 144                 gpio {
 145                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 146                         ralink,function = "gpio";
 147                 };
 148         };
 149 };