target/linux/ramips/dts/F5D8235_V1.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "F5D8235_V1", "ralink,rt2880-soc";
   9         model = "Belkin F5D8235 v1";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "uboot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "uboot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "linux";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         rtl8366s {
  44                 compatible = "realtek,rtl8366s";
  45                 gpio-sda = <&gpio0 1 0>;
  46                 gpio-sck = <&gpio0 2 0>;
  47         };
  48
  49         gpio-keys-polled {
  50                 compatible = "gpio-keys-polled";
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53                 poll-interval = <100>;
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio0 0 1>;
  58                         linux,code = <0x211>;
  59                 };
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 9 1>;
  64                         linux,code = <0x198>;
  65                 };
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70
  71                 storage {
  72                         label = "f5d8235-v1:blue:storage";
  73                         gpios = <&gpio0 7 1>;
  74                 };
  75
  76                 storage2 {
  77                         label = "f5d8235-v1:orange:storage";
  78                         gpios = <&gpio0 8 1>;
  79                 };
  80         };
  81 };
  82
  83 &gpio0 {
  84         status = "okay";
  85 };
  86
  87 &pinctrl {
  88         state_default: pinctrl0 {
  89                 gpio {
  90                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  91                         ralink,function = "gpio";
  92                 };
  93         };
  94 };
  95
  96 &ethernet {
  97         status = "okay";
  98         mtd-mac-address = <&factory 0x4>;
  99
 100         port@0 {
 101                 mediatek,fixed-link = <1000 1 1 1>;
 102         };
 103 };
 104
 105 /* FIXME: no u-boot partition and 0x40000@uboot is out of boundaries */
 106 /*&wmac {
 107         status = "okay";
 108         ralink,mtd-eeprom = <&u-boot 0x40000>;
 109 };
 110 */
 111