target/linux/ramips/dts/F7C027.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "belkin,f7c027", "ralink,rt5350-soc";
  10         model = "Belkin F7C027";
  11
  12         aliases {
  13                 led-boot = &led_status_orange;
  14                 led-failsafe = &led_status_orange;
  15                 led-running = &led_status_orange;
  16                 led-upgrade = &led_status_orange;
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 status {
  23                         label = "f7c027:blue:status";
  24                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 power {
  28                         label = "f7c027:blue:power";
  29                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_status_orange: orange {
  33                         label = "f7c027:orange:status";
  34                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 relay {
  38                         label = "f7c027:device:relay";
  39                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  40                 };
  41         };
  42
  43         gpio-keys-polled {
  44                 compatible = "gpio-keys-polled";
  45                 poll-interval = <20>;
  46
  47                 top {
  48                         label = "restore";
  49                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52
  53                 power {
  54                         label = "power";
  55                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_RFKILL>;
  57                 };
  58
  59                 sensor {
  60                         label = "sensor";
  61                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  62                         linux,code = <BTN_0>;
  63                 };
  64         };
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         m25p80@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <10000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x0 0x30000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@30000 {
  87                                 label = "u-boot-env";
  88                                 reg = <0x30000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         factory: partition@40000 {
  93                                 label = "factory";
  94                                 reg = <0x40000 0x10000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@50000 {
  99                                 compatible = "denx,uimage";
 100                                 label = "firmware";
 101                                 reg = <0x50000 0x770000>;
 102                         };
 103
 104                         partition@7c0000 {
 105                                 label = "firmware2";
 106                                 reg = <0x7c0000 0x770000>;
 107                         };
 108
 109                         partition@f30000 {
 110                                 label = "belkin_settings";
 111                                 reg = <0xf30000 0xa0000>;
 112                         };
 113
 114                         partition@fd0000 {
 115                                 label = "unknown";
 116                                 reg = <0xfd0000 0x10000>;
 117                         };
 118
 119                         partition@fe0000 {
 120                                 label = "nvram";
 121                                 reg = <0xfe0000 0x10000>;
 122                         };
 123
 124                         partition@ff0000 {
 125                                 label = "user_factory";
 126                                 reg = <0xff0000 0x10000>;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &wmac {
 133         ralink,mtd-eeprom = <&factory 0>;
 134 };
 135
 136 &pinctrl {
 137         state_default: pinctrl0 {
 138                 gpio {
 139                         ralink,group = "i2c", "jtag", "uartf";
 140                         ralink,function = "gpio";
 141                 };
 142         };
 143 };