target/linux/ramips/dts/HLKRM04.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "hilink,hlk-rm04", "ralink,rt5350-soc";
  10         model = "HILINK HLK-RM04";
  11
  12         memory@0 {
  13                 device_type = "memory";
  14                 reg = <0x0 0x1000000>;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS1,57600";
  19         };
  20
  21         gpio-export {
  22                 compatible = "gpio-export";
  23                 #size-cells = <0>;
  24
  25                 /* I2C */
  26                 gpio1 {
  27                         /* I2C_I2C_SD */
  28                         gpio-export,name = "hlk-rm04:gpio0";
  29                         gpio-export,direction_may_change = <1>;
  30                         gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  31                 };
  32                 gpio2 {
  33                         /* I2C_I2C_SCLK */
  34                         gpio-export,name = "hlk-rm04:gpio1";
  35                         gpio-export,direction_may_change = <1>;
  36                         gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  37                 };
  38         };
  39
  40         gpio-keys-polled {
  41                 compatible = "gpio-keys-polled";
  42                 poll-interval = <20>;
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RESTART>;
  47                 };
  48                 wps {
  49                         label = "wps";
  50                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_WPS_BUTTON>;
  52                 };
  53         };
  54 };
  55
  56 &uart {
  57         status = "okay";
  58 };
  59
  60 &spi0 {
  61         status = "okay";
  62
  63         m25p80@0 {
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <10000000>;
  67
  68                 partitions {
  69                         compatible = "fixed-partitions";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72
  73                         partition@0 {
  74                                 label = "u-boot";
  75                                 reg = <0x0 0x30000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@30000 {
  80                                 label = "u-boot-env";
  81                                 reg = <0x30000 0x10000>;
  82                                 read-only;
  83                         };
  84
  85                         factory: partition@40000 {
  86                                 label = "factory";
  87                                 reg = <0x40000 0x10000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@50000 {
  92                                 compatible = "denx,uimage";
  93                                 label = "firmware";
  94                                 reg = <0x50000 0x3b0000>;
  95                         };
  96                 };
  97         };
  98 };
  99
 100 &pinctrl {
 101         state_default: pinctrl0 {
 102                 gpio {
 103                         ralink,group = "i2c", "jtag";
 104                         ralink,function = "gpio";
 105                 };
 106
 107                 uartf_gpio {
 108                         ralink,group = "uartf";
 109                         ralink,function = "gpio uartf";
 110                 };
 111         };
 112 };
 113
 114 &ethernet {
 115         mtd-mac-address = <&factory 0x4>;
 116 };
 117
 118 &wmac {
 119         ralink,mtd-eeprom = <&factory 0>;
 120 };
 121
 122 &ehci {
 123         status = "okay";
 124 };
 125
 126 &ohci {
 127         status = "okay";
 128 };