ramips: Use dts alias based status led
[openwrt/openwrt.git] / target / linux / ramips / dts / HW550-3G.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "aztech,hw550-3g", "ralink,rt3052-soc";
10 model = "Aztech HW550-3G";
11
12 aliases {
13 led-status = &led_status;
14 };
15
16 cfi@1f000000 {
17 compatible = "cfi-flash";
18 reg = <0x1f000000 0x800000>;
19 bank-width = <2>;
20 device-width = <2>;
21 #address-cells = <1>;
22 #size-cells = <1>;
23
24 partition@0 {
25 label = "u-boot";
26 reg = <0x0 0x30000>;
27 read-only;
28 };
29
30 partition@30000 {
31 label = "u-boot-env";
32 reg = <0x30000 0x10000>;
33 read-only;
34 };
35
36 factory: partition@40000 {
37 label = "factory";
38 reg = <0x40000 0x10000>;
39 read-only;
40 };
41
42 partition@50000 {
43 label = "firmware";
44 reg = <0x50000 0x7b0000>;
45 };
46 };
47
48 gpio-leds {
49 compatible = "gpio-leds";
50
51 usb {
52 label = "hw550-3g:green:usb";
53 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
54 };
55
56 3g {
57 label = "hw550-3g:green:3g";
58 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
59 };
60
61 led_status: status {
62 label = "hw550-3g:green:status";
63 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
64 };
65
66 wps {
67 label = "hw550-3g:green:wps";
68 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
69 };
70 };
71
72 gpio-keys-polled {
73 compatible = "gpio-keys-polled";
74 #address-cells = <1>;
75 #size-cells = <0>;
76 poll-interval = <20>;
77
78 reset {
79 label = "reset";
80 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
81 linux,code = <KEY_RESTART>;
82 };
83
84 connect {
85 label = "connect";
86 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
87 linux,code = <KEY_CONNECT>;
88 };
89
90 wps {
91 label = "wps";
92 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
93 linux,code = <KEY_WPS_BUTTON>;
94 };
95 };
96 };
97
98 &pinctrl {
99 state_default: pinctrl0 {
100 gpio {
101 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
102 ralink,function = "gpio";
103 };
104 };
105 };
106
107 &ethernet {
108 mtd-mac-address = <&factory 0x28>;
109 };
110
111 &esw {
112 mediatek,portmap = <0x3e>;
113 };
114
115 &wmac {
116 ralink,mtd-eeprom = <&factory 0>;
117 };
118
119 &otg {
120 status = "okay";
121 };