target/linux/ramips/dts/JHR-N805R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "JHR-N805R", "ralink,rt3050-soc";
   7         model = "JCG JHR-N805R";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 system {
  13                         label = "jhr-n805r:blue:system";
  14                         gpios = <&gpio0 9 1>;
  15                 };
  16         };
  17
  18         gpio-keys-polled {
  19                 compatible = "gpio-keys-polled";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio0 10 1>;
  27                         linux,code = <0x198>;
  28                 };
  29         };
  30 };
  31
  32 &pinctrl {
  33         state_default: pinctrl0 {
  34                 gpio {
  35                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  36                         ralink,function = "gpio";
  37                 };
  38         };
  39 };
  40
  41 &spi0 {
  42         status = "okay";
  43
  44         m25p80@0 {
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47                 compatible = "jedec,spi-nor";
  48                 reg = <0 0>;
  49                 linux,modalias = "m25p80", "mx25l3205d";
  50                 spi-max-frequency = <10000000>;
  51
  52                 partition@0 {
  53                         label = "u-boot";
  54                         reg = <0x0 0x30000>;
  55                         read-only;
  56                 };
  57
  58                 partition@30000 {
  59                         label = "u-boot-env";
  60                         reg = <0x30000 0x10000>;
  61                         read-only;
  62                 };
  63
  64                 factory: partition@40000 {
  65                         label = "factory";
  66                         reg = <0x40000 0x10000>;
  67                         read-only;
  68                 };
  69
  70                 partition@50000 {
  71                         label = "firmware";
  72                         reg = <0x50000 0x3b0000>;
  73                 };
  74         };
  75 };
  76
  77 &ethernet {
  78         mtd-mac-address = <&factory 0x2e>;
  79 };
  80
  81 &esw {
  82         mediatek,portmap = <0x3e>;
  83 };
  84
  85 &wmac {
  86         ralink,mtd-eeprom = <&factory 0>;
  87 };