target/linux/ramips/dts/JHR-N825R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "JHR-N825R", "ralink,rt3052-soc";
   7         model = "JCG JHR-N825R";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "u-boot-env";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "factory";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x3b0000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43                 system {
  44                         label = "jhr-n825r:red:power";
  45                         gpios = <&gpio0 9 1>;
  46                 };
  47         };
  48
  49         gpio-keys-polled {
  50                 compatible = "gpio-keys-polled";
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53                 poll-interval = <20>;
  54                 reset_wps {
  55                         label = "reset_wps";
  56                         gpios = <&gpio0 10 1>;
  57                         linux,code = <0x198>;
  58                 };
  59         };
  60 };
  61
  62 &pinctrl {
  63         state_default: pinctrl0 {
  64                 gpio {
  65                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  66                         ralink,function = "gpio";
  67                 };
  68         };
  69 };
  70
  71 &ethernet {
  72         mtd-mac-address = <&factory 0x2e>;
  73 };
  74
  75 &esw {
  76         mediatek,portmap = <0x3e>;
  77 };
  78
  79 &wmac {
  80         ralink,mtd-eeprom = <&factory 0>;
  81 };