4089ce64f5da120bb4d1ac884be4168ea637f546
[openwrt/openwrt.git] / target / linux / ramips / dts / K2P.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "phicomm,k2p", "mediatek,mt7621-soc";
10 model = "Phicomm K2P";
11
12 memory@0 {
13 device_type = "memory";
14 reg = <0x0 0x8000000>;
15 };
16
17 chosen {
18 bootargs = "console=ttyS0,57600";
19 };
20
21 gpio-leds {
22 compatible = "gpio-leds";
23
24 stat_r {
25 label = "k2p:red:status";
26 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
27 };
28
29 stat_y {
30 label = "k2p:yellow:status";
31 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
32 };
33
34 stat_b {
35 label = "k2p:blue:status";
36 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
37 };
38 };
39
40 gpio-keys-polled {
41 compatible = "gpio-keys-polled";
42 #address-cells = <1>;
43 #size-cells = <0>;
44 poll-interval = <20>;
45
46 reset {
47 label = "reset";
48 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
50 };
51 };
52 };
53
54 &spi0 {
55 status = "okay";
56
57 m25p80@0 {
58 #address-cells = <1>;
59 #size-cells = <1>;
60 compatible = "jedec,spi-nor";
61 reg = <0>;
62 spi-max-frequency = <10000000>;
63 m25p,chunked-io = <32>;
64
65 partition@0 {
66 label = "u-boot";
67 reg = <0x0 0x30000>;
68 read-only;
69 };
70
71 partition@30000 {
72 label = "u-boot-env";
73 reg = <0x30000 0x10000>;
74 read-only;
75 };
76
77 factory: partition@40000 {
78 label = "factory";
79 reg = <0x40000 0x10000>;
80 read-only;
81 };
82
83 partition@50000 {
84 label = "permanent_config";
85 reg = <0x50000 0x50000>;
86 read-only;
87 };
88
89 partition@a0000 {
90 label = "firmware";
91 reg = <0xa0000 0xf60000>;
92 };
93 };
94 };
95
96 &pcie {
97 status = "okay";
98
99 pcie0 {
100 mt76@0,0 {
101 reg = <0x0000 0 0 0 0>;
102 device_type = "pci";
103 mediatek,mtd-eeprom = <&factory 0x0>;
104 };
105 };
106 };
107
108 &ethernet {
109 mtd-mac-address = <&factory 0xe000>;
110 };
111
112 &pinctrl {
113 state_default: pinctrl0 {
114 gpio {
115 ralink,group = "i2c", "jtag";
116 ralink,function = "gpio";
117 };
118 };
119 };