ffb76e3bf4d0811a0a958be803b3a3573fdc01ba
[openwrt/openwrt.git] / target / linux / ramips / dts / MR-102N.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "aximcom,mr-102n", "ralink,rt3052-soc";
10 model = "AXIMCom MR-102N";
11
12 aliases {
13 led-boot = &led_status;
14 led-failsafe = &led_status;
15 led-running = &led_status;
16 led-upgrade = &led_status;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 compatible = "denx,uimage";
50 label = "firmware";
51 reg = <0x50000 0x790000>;
52 };
53
54 partition@7e0000 {
55 label = "nvram";
56 reg = <0x7e0000 0x10000>;
57 };
58
59 partition@7f0000 {
60 label = "nvram_backup";
61 reg = <0x7f0000 0x10000>;
62 };
63 };
64 };
65
66 leds {
67 compatible = "gpio-leds";
68
69 usb {
70 label = "mr-102n:green:usb";
71 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
72 trigger-sources = <&otg_port1>;
73 linux,default-trigger = "usbport";
74 };
75
76 led_status: status {
77 label = "mr-102n:amber:status";
78 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
79 };
80
81 wlan {
82 label = "mr-102n:green:wlan";
83 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
84 };
85 };
86
87 keys {
88 compatible = "gpio-keys-polled";
89 poll-interval = <20>;
90
91 reset {
92 label = "reset";
93 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_RESTART>;
95 };
96
97 wps {
98 label = "wps";
99 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
100 linux,code = <KEY_WPS_BUTTON>;
101 };
102 };
103 };
104
105 &pinctrl {
106 state_default: pinctrl0 {
107 gpio {
108 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
109 ralink,function = "gpio";
110 };
111 };
112 };
113
114 &ethernet {
115 mtd-mac-address = <&factory 0x4>;
116 };
117
118 &esw {
119 status = "okay";
120 #mediatek,portmap = <0x3e>;
121 mediatek,portmap = <0x2f>;
122 };
123
124 &wmac {
125 ralink,mtd-eeprom = <&factory 0>;
126 };
127
128
129 &otg {
130 status = "okay";
131 };