target/linux/ramips/dts/MT7620a_MT7610e.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
  10         model = "Ralink MT7620A evaluation board";
  11
  12         gpio-keys-polled {
  13                 compatible = "gpio-keys";
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 poll-interval = <20>;
  17
  18                 wps {
  19                         label = "wps";
  20                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  21                         linux,code = <BTN_0>;
  22                 };
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  27                         linux,code = <BTN_1>;
  28                 };
  29         };
  30 };
  31
  32 &gpio0 {
  33         status = "okay";
  34 };
  35
  36 &spi0 {
  37         status = "okay";
  38
  39         m25p80@0 {
  40                 #address-cells = <1>;
  41                 #size-cells = <1>;
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <1000000>;
  45
  46                 partition@0 {
  47                         label = "u-boot";
  48                         reg = <0x0 0x30000>;
  49                         read-only;
  50                 };
  51
  52                 partition@30000 {
  53                         label = "u-boot-env";
  54                         reg = <0x30000 0x10000>;
  55                         read-only;
  56                 };
  57
  58                 factory: partition@40000 {
  59                         label = "factory";
  60                         reg = <0x40000 0x10000>;
  61                         read-only;
  62                 };
  63
  64                 partition@50000 {
  65                         label = "firmware";
  66                         reg = <0x50000 0x7b0000>;
  67                 };
  68         };
  69 };
  70
  71 &ethernet {
  72         status = "okay";
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&ephy_pins>;
  75         mediatek,portmap = "llllw";
  76 };
  77
  78 &gsw {
  79         mediatek,port4 = "ephy";
  80 };
  81
  82 &sdhci {
  83         status = "okay";
  84 };
  85
  86 &pcie {
  87         status = "okay";
  88 };