ramips: fix support Planex MZK-750DHP.
[openwrt/openwrt.git] / target / linux / ramips / dts / MZK-750DHP.dts
1 /dts-v1/;
2
3 /include/ "mt7620a.dtsi"
4
5 / {
6 compatible = "ralink,mt7620a-soc";
7 model = "Planex MZK-750DHP";
8
9 palmbus@10000000 {
10 gpio1: gpio@638 {
11 status = "okay";
12 };
13
14 gpio2: gpio@660 {
15 status = "okay";
16 };
17
18 spi@b00 {
19 status = "okay";
20
21 m25p80@0 {
22 #address-cells = <1>;
23 #size-cells = <1>;
24 compatible = "jedec,spi-nor";
25 reg = <0 0>;
26 linux,modalias = "m25p80", "mx25l6405d";
27 spi-max-frequency = <10000000>;
28
29 partition@0 {
30 label = "u-boot";
31 reg = <0x0 0x30000>;
32 read-only;
33 };
34
35 partition@30000 {
36 label = "u-boot-env";
37 reg = <0x30000 0x10000>;
38 read-only;
39 };
40
41 factory: partition@40000 {
42 label = "factory";
43 reg = <0x40000 0x10000>;
44 read-only;
45 };
46
47 partition@50000 {
48 label = "firmware";
49 reg = <0x50000 0x7b0000>;
50 };
51 };
52 };
53 };
54
55 pinctrl {
56 state_default: pinctrl0 {
57 gpio {
58 ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
59 ralink,function = "gpio";
60 };
61 };
62 };
63
64 ethernet@10100000 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&ephy_pins>;
67 mtd-mac-address = <&factory 0x4>;
68 mediatek,portmap = "llllw";
69 };
70
71 gsw@10110000 {
72 mediatek,port4 = "ephy";
73 };
74
75 wmac@10180000 {
76 ralink,mtd-eeprom = <&factory 0>;
77 };
78
79 pcie@10140000 {
80 status = "okay";
81
82 pcie-bridge {
83 mt76@0,0 {
84 reg = <0x0000 0 0 0 0>;
85 device_type = "pci";
86 mediatek,mtd-eeprom = <&factory 0x8000>;
87 mediatek,2ghz = <0>;
88 };
89 };
90 };
91
92 gpio-leds {
93 compatible = "gpio-leds";
94
95 wps {
96 label = "mzk-750dhp:green:wps";
97 gpios = <&gpio2 15 1>;
98 };
99
100 power {
101 label = "mzk-750dhp:green:power";
102 gpios = <&gpio1 15 1>;
103 };
104
105 wlan5g {
106 label = "mzk-750dhp:green:wlan5g";
107 gpios = <&gpio1 14 1>;
108 };
109 };
110
111 gpio-keys-polled {
112 compatible = "gpio-keys-polled";
113 #address-cells = <1>;
114 #size-cells = <0>;
115 poll-interval = <20>;
116
117 s1 {
118 label = "reset";
119 gpios = <&gpio0 1 1>;
120 linux,code = <0x198>;
121 };
122
123 s2 {
124 label = "wps";
125 gpios = <&gpio2 19 1>;
126 linux,code = <0x211>;
127 };
128 };
129 };