target/linux/ramips/dts/MZK-DP150N.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
  10         model = "Planex MZK-DP150N";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         label = "mzk-dp150n:green:power";
  24                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys-polled";
  30                 poll-interval = <20>;
  31
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37         };
  38 };
  39
  40 &gpio1 {
  41         status = "okay";
  42 };
  43
  44 &spi0 {
  45         status = "okay";
  46
  47         m25p80@0 {
  48                 compatible = "jedec,spi-nor";
  49                 reg = <0>;
  50                 spi-max-frequency = <10000000>;
  51
  52                 partitions {
  53                         compatible = "fixed-partitions";
  54                         #address-cells = <1>;
  55                         #size-cells = <1>;
  56
  57                         partition@0 {
  58                                 label = "uboot";
  59                                 reg = <0x0 0x30000>;
  60                                 read-only;
  61                         };
  62
  63                         partition@30000 {
  64                                 label = "uboot-env";
  65                                 reg = <0x30000 0x10000>;
  66                                 read-only;
  67                         };
  68
  69                         factory: partition@40000 {
  70                                 label = "factory";
  71                                 reg = <0x40000 0x10000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@50000 {
  76                                 compatible = "denx,uimage";
  77                                 label = "firmware";
  78                                 reg = <0x50000 0x3b0000>;
  79                         };
  80                 };
  81         };
  82 };
  83
  84 &spi1 {
  85         spidev@0 {
  86                 compatible = "linux,spidev";
  87                 spi-max-frequency = <10000000>;
  88                 reg = <0>;
  89         };
  90 };
  91
  92 &pinctrl {
  93         state_default: pinctrl0 {
  94                 gpio {
  95                         ralink,group = "jtag", "uartf", "led";
  96                         ralink,function = "gpio";
  97                 };
  98         };
  99 };
 100
 101 &ethernet {
 102         mtd-mac-address = <&factory 0x4>;
 103 };
 104
 105 &esw {
 106         mediatek,portmap = <0x17>;
 107 };
 108
 109 &wmac {
 110         ralink,mtd-eeprom = <&factory 0>;
 111         ralink,led-polarity = <1>;
 112 };